[sdiy] small mixer circuits (or other small circuits)

[pH_________]

you might want to look at Ken Stone's dc mixer board:
http://www.talktron.com.au/mixer/Mixer.htm
http://kato.sai.com.au/catgirl/synth/modules.html
or even his psycho LFO, when he has more boards made.
best,
phil

Mountain Man wrote:

> Hi folks,
>
> For my first "real" DIY project, I'm considering adding a few circuits
> to the Paia 9700 that I'm finishing up.  I'd like to add
> some simple additional functions for which I can fit panel controls into
> the two blank end plates of the unit.  This means I
> have about 1 1/2 inches by 3U of space on each end.  I'd like to find
> things that use jacks only, or only one or two pots.  I'm considering a
> sample and hold circuit, a ring mod circuit (even though there is one
> already, using it gobbles up a VCA), or some simple mixing circuits.
> I'd like to get pointers to any simple mixers that would meet these
> requirements.  I'm thinking of a simple
> two-in one-out panner with a single pot, a simple VCA with one or even
> no pots, or things of this sort.  I've done some poking around on DIY
> sites, but everything I've found so far is too complicated (i.e., has
> too many controls for the space I have).  I'd really appreciate any
> pointers to circuits, or suggestions for other sorts of things I might
> use my bitty panel space for/  Also, any tips on "squeezing" are most
> welcome!
>
> Thanks,
> Elby