[sdiy] replacing step incrementor/decrementor with continuous pot

[Rob]

OH!!! DUH!!! BTW, you can just take out the clik out of the existing pot if
you want!!!

Thats the easiest way.. It was a bit early in the AM for me to think.. I am
wrapped up with a digital camera project at work right now, so my mind is
elsewhere.

There is a little click band inside the pots, and all you have to do is open
up the pot and take it out, or bend the little wire that settles in the
grooves to provide the click.

Rob

----- Original Message -----
From: "Emmanuel AMADIO" <emmanuel at postimpressions.co.uk>
To: "Plutonique9" <Plutonique9 at symbiocom.com>; "DIY Mailing list"
<synth-diy at node12b53.a2000.nl>
Sent: Tuesday, March 20, 2001 12:07 PM
Subject: Re: [sdiy] replacing step incrementor/decrementor with continuous
pot


> Shouldn't be to hard using a rotary encoder with a bit of logic to
recreate the up and down from the increment/decrement
> or whatever of the rotary encoder.
> Basically the rotary encoder has 3 digital output which varies in gray
code I think, so you can determine if you
> increment or decrement or don't change using probably only logic gates.
>
> Hoping it will help.
>
> Emmanuel
>
>