[sdiy] Speaking of OTAs....

[Happy Harry]

Good Point:

Same for the CA3080, 3280. This pin looks like 2 diode drops
to the negative rail...

It will take all the current you can supply, briefly, once....
You should stay under 1mA for best results (I think 2mA is the
limit but it is more nonlinear above 1mA)

H^) harry


>From: John Blacet <blacet at blacet.com>
>To: "J. Larry Hendry" <jlarryh at iquest.net>
>CC: synth-diy at node12b53.a2000.nl
>Subject: Re: [sdiy] Speaking of OTAs....
>Date: Mon, 12 Mar 2001 08:27:39 -0800
>
>NJM13600D, Mouser.
>
>Put a 10K+ resistor in line with the current control pins, at least when
>you are experimenting. This pin dies *real* easy with too much current.
>
>--
>___________________
>John Blacet
>Blacet Research
>http://www.blacet.com
>
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com