[sdiy] separate waveform outputs ?

[Torbjörn Hörnfeldt]

Why not just check out the ARP 2500 Owners Manual. You will find it at
Anders Spontons excellent web-site, http://omega.tellus.vallentuna.se/anders/ 
under Sundries.

Great inspiration for a modular...

Torbjörn

----- Original Message ----- 
From: "Grant Richter" <grichter at asapnet.net>
To: <owner-synth-diy at node12b53.a2000.nl>; <synth-diy at node12b53.a2000.nl>
Sent: Thursday, March 08, 2001 8:24 AM
Subject: Re: [sdiy] separate waveform outputs ?


> As I recall the ARP 2500 had different model VCOs with different options.
> One had a mixer for the waveforms, one had individual switches, one had a
> multiple position switch? Anybody remember?
> 
> > From: Kenneth Martinez <kmartinez at bency.com>
> > Reply-To: owner-synth-diy at node12b53.a2000.nl
> > Date: Wed, 07 Mar 2001 16:05:01 -0700
> > To: synth-diy at node12b53.a2000.nl
> > Subject: [sdiy] separate waveform outputs ?
> > 
> > I'm working on a VCO and need some advice.  I started to build on/off
> > switches for triangle, pulse, and sawtooth, mixed into a single VCO
> > output, as that's what I'm used to from my experience with machines
> > using preset signal paths (Prophets, Oberheims, etc).  Recently I've
> > looked at pictures of modular VCOs and noticed that they have separate
> > outputs for each waveform; is this something that's used a lot, and
> > something you'd recommend that I include?  Is it common to process each
> > waveform separately, or use VCAs to mix or crossfade between them; or
> > would I probably not be limiting myself too much by continuing with my
> > design having one combined VCO output?
> > 
> > 
> > 
> > 
> 
>