[sdiy] Shielded Cable

[Byron G. Jacquot]

At 12:28 PM 03/06/2001 -0800, you wrote:
>    I am looking for cable for wiring up my front panels.  I would like
>twin conductor, preferably #24, with a shield (this is for audio
>frequencies).  I have not had much luck in locating much of a selection,
>and what I purchased, while OK, is a bit difficult to work with (a bit
>stiff and thick).  I have consulted the usual suspects (Mouser and
>Digikey) but did not see anything that made me say "a-ha".  I have never
>had to purchase such a thing before, so this is all new territory for
>me.  Anybody have any idea's for sources?

Your description sounds kinda like Mogami or Gepco mic/studio cable.
(Flexible, good shield)

Marshall Electronics is the importer for Mogami, and there are parts of the
catalog online at:
http://www.mars-cam.com/cable/mogami.html

I've used Mogami for some installation work, and it was very well-behaved
cable.  Easy to strip just the insulation, and it's _incredibly_ flexible.

Full Compass and Markertek also carry some of these sorts of cable (Gepco,
Canare, etc.).  Both have decent online catalogs: www.fullcompass.com and
www.markertek.com.

These might get you a little nearer what you're looking for.

Byron Jacquot