[sdiy] Foil Tape?

[harry]

The jack is maybe damaged then...  is this some ultra rare
collectable beast... if not I'd go looking for a replacement
jack instead.

Sure... there IS metal foil... you could even peel a patch off
of circuit board !!!  Cut, heat with a heat gun to soften the
adhesive... peel.

I wouldn't though... its gonna be tough...

H^) harry

Moho Disco wrote:

> I do have the right size plug, I tried every single
> plug from Radio Shack (about 20 of them), and
> this is the only one that fits.  The next size up is
> way too big. The current size works fine, until
> I jiggle it a bit... it's like I just need a 1mm thick
> layer of something around it.
>
> Lava
>
> ----- Original Message -----
> From: harry <harrybissell at prodigy.net>
> To: Moho Disco <moho at mohodisco.com>
> Cc: <synth-diy at node12b53.a2000.nl>
> Sent: Monday, March 05, 2001 6:20 AM
> Subject: Re: [sdiy] Foil Tape?
>
> > Nah... buy the right size plug and solder it on the
> > adapter... there are 5-6 sizes common...
> >
> > H^) harry
> >
> > Moho Disco wrote:
> >
> > > Hi Guys,
> > >
> > > I have a loose AC adaptor, doesn't quite fit in the hole very snugly...
> > > Is there such a thing as metal foil tape that I can wrap around the
> > > outside, that will stick to it, but still conduct electricity?
> > >
> > > Thanks,
> > >
> > > Lava
> >