[sdiy] Voltage Shaper

[patchell]

    Most of what is on the forth page is a simple regulator to provide voltage
for the pots.  Also, all of the bypass caps are on that page.

Microtonal wrote:

> Jim,
>
> Looks good!  The resistor you added to breakpoint stage fixes a clipping
> problem with the inputs seen in the original Function Generator circuit.
>
> The function of page 4 is not clear to me, especially since it doesn't
> connect to the rest of the circuit on the PCB.  Would you care to elaborate?
>
> best,
> John Loffink
> microtonal at worldnet.att.net
>
> ----- Original Message -----
> From: "patchell" <patchell at silcom.com>
> To: <synth-diy at node12b53.a2000.nl>
> Sent: Saturday, March 03, 2001 7:05 PM
> Subject: [sdiy] Voltage Shaper
>
> >     I just posted the schematic for the Waveform/Voltage shaper.  The
> > PCB is not done...So, If I have made a blunder, or there is a feature
> > you think just has to be on there, please let me know.
> >
> > http://www.oldcrows.net/~patchell/shaper/shaper.html
> >
> >     Also, somebody said something about putting a hole pattern in the
> > board so that it can be mounted on a MOTM bracket....Is that info
> > availiable?
> >
> > --
> >  -Jim
> > ------------------------------------------------
> > * Visit:http://www.silcom.com/~patchell/
> > *-----------------------------------------------
> > *I'm sure glad Merry Christmas comes just once a year
> > * -Yogi Yorgensen
> > ------------------------------------------------
> >
> >

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------
*I'm sure glad Merry Christmas comes just once a year
* -Yogi Yorgensen
------------------------------------------------