[sdiy] Electronics Workbench

[Colin Fraser]

> -----Original Message-----
> From: owner-synth-diy at node12b53.a2000.nl
> [mailto:owner-synth-diy at node12b53.a2000.nl]On Behalf Of Grant Richter
> Sent: 03 March 2001 20:33
> To: owner-synth-diy at node12b53.a2000.nl; Synth-DIY
> Subject: Re: [sdiy] Electronics Workbench
>
>
> I used Electronics Workbench extensively in the design of the
> Wiard. It is
> very good for testing sub-circuit section to tweek resistor
> values and the
> like. I even modeled a complete Buchla 258 oscillator with it, and it
> oscillated! You can model the audio path with op-amps and tweek the
> bandwidth using the Bode plotter. I have found it an
> extremely useful tool
> and it saves a lot of tedious calculation.

Can you log the output as, or convert it to, a wav file and listen to it ?
I wonder how close your simulated Buchla vco would sound to the actual
ciruit.

Colin f