[sdiy] Mono to Stereo

[Rob B]

afaik, you just need to plug the input into the insert loop.. You will need
to get a RTS type breakout cable..

You have to muck through the manual a bit, but its in there..

Damn, 99 bux.. thats incredible..

Rob

----- Original Message -----
From: Moho Disco <moho at mohodisco.com>
To: <synth-diy at node12b53.a2000.nl>
Sent: Friday, June 01, 2001 9:24 PM
Subject: [sdiy] Mono to Stereo


> I just got a brand new Electrix Mo-FX on $99 blowout
> from Guitar Center... but the problem is, I want to run
> my mono analog synths through it, and it doesn't have
> a mono input.  Whatever side you plug it into, that's
> the only side you hear it on (unlike other fx processors
> I own that put the mono signal in the middle). This
> is the ONLY downside to this box so far...
>
> Now, running the unit out of a mixer is NOT an option
> for me... I know some of you will be suggesting it.
>
> How do I build a little box with a mono input and stereo
> outs, that will put the mono signal in the middle?  Surely
> this has got to be super easy to do... If somebody could
> point me in the right direction, or to some schematics I'd
> appreciate it...
>
> Thanks,
>
> Lava
>