[sdiy] Min. Bd. 1 Osc. g1-113G MOOG

[Tim Curtis]

>
> > From: owner-synth-diy at node12b53.a2000.nl
> > [mailto:owner-synth-diy at node12b53.a2000.nl]On Behalf Of
> > Nicholas Pelkey
> > Sent: Wednesday, January 31, 2001 3:53 AM
> > To: synth-diy at node12b53.a2000.nl
> > Cc: analogue at hyperreal.org
> > Subject: [sdiy] Min. Bd. 1 Osc. g1-113G MOOG
> >
> > This is the type of minimoog osc board that I have.  Could
> > someone tell me if it is first, second or third
> > issue/revision?  Also I need to connect it to some jacks
> > switches and pots...also power supply fo a home in my
> > modular.  I am considering getting some connectors from Fred
> > McNiff..... question is.... where do these connections
> > go...... I need a scematic or labeled layout of the mini
> > osc..... any help would be great.

That's a second revision board - fairly common.  There are some great mods out
there that help improve it's stability, you might want to check them out.

They sound great.  IMO, they're better sounding (though less stable) than the
later boards and apparently they're much more stable than the first revison
ones.  A pretty fair compromise.


Tim