[sdiy] Min. Bd. 1 Osc. g1-113G MOOG

[Colin Fraser]

> -----Original Message-----
> From: owner-synth-diy at node12b53.a2000.nl
> [mailto:owner-synth-diy at node12b53.a2000.nl]On Behalf Of
> Nicholas Pelkey
> Sent: Wednesday, January 31, 2001 3:53 AM
> To: synth-diy at node12b53.a2000.nl
> Cc: analogue at hyperreal.org
> Subject: [sdiy] Min. Bd. 1 Osc. g1-113G MOOG
>
> This is the type of minimoog osc board that I have.  Could
> someone tell me if it is first, second or third
> issue/revision?  Also I need to connect it to some jacks
> switches and pots...also power supply fo a home in my
> modular.  I am considering getting some connectors from Fred
> McNiff..... question is.... where do these connections
> go...... I need a scematic or labeled layout of the mini
> osc..... any help would be great.

I can't remember the wording on the PCB foil off-hand, but if the board you
have is the same as the one here -
http://www.octavo.demon.co.uk/colinf/mini/ramini.htm - which I believe it
is, I would suggest you should swap it with an early RA Moog minimoog owner
who has had their early board replaced and wants to restore their synth to
its original state.
These boards aren't particularly stable, but they are very rare (only 200
made at the most).

Colin f