[sdiy] 18vac power supply

[Rob]

Well, fyi, its usually pretty common to see 16 volt version, so you might
want to go that route.. I would just make sure to get one that was about
300ma or more, just to make up the wattage difference. You always want a bit
extra because the chinese manufacturers who make most of this stuff usually
overrate it badly.

Hehe.. We had them try to sell us a teeny tiny 12v 3a (yes, thats amps
folks!) that was no bigger than a couple of matchboxes laid end to end,
about 1 inch by 4 inches!

I did something not very politically correct: I laughed heartily when I saw
it! ;))

At least we know they have dreams! haha!

Rob

----- Original Message -----
From: "harry" <harrybissell at prodigy.net>
To: "Nicholas Pelkey" <njpguy at icqmail.com>
Cc: <synth-diy at node12b53.a2000.nl>
Sent: Saturday, January 27, 2001 6:33 PM
Subject: Re: [sdiy] 18vac power supply


> Try www.mpja.com  Marlin P. Jones has lots of adapters... maybe YOURS ???
>
> H^) harry
>
> Nicholas Pelkey wrote:
>
> > I need help finding a power plug for my Frostwave Resonator.  It needs
to be 15-18vac 200mA with a 2.1mm plug.  I'd prefer the 18vac if I have a
choice.  Any help would be great.
> > Thanks,
> > Nick P
> >
> > -------------------------------------------------------------
> > Sign up for ICQmail at http://www.icq.com/icqmail/signup.html
>