Radio shack Electronic Record / Playback Module Kit

[danial stocks]

>
>Hi Andrew and all,
>
>I looked at a few different recording ICs for a DIY sampler but the two 
>I've
>tried had a big, annoying delay between when the 'sample' is triggered and
>when it decides to play. The ones I tried were APR9301-single shot but 
>great
>pitch/sample rate bending, and ISD 1416. This one held 8 'samples' but
>didn't reset until the sample was finished playing (and no amount of
>electronic abuse would do it :) Can't tell what is used in that kit but it
>looks different again.



ISD1416 should be able to stop during play.. datasheet indicates edge 
triggered will run to EOM, but lvl trig can stop at any time.. These chips 
appear quite versatile.. Im thinking of using something like this for a 
solid state mellotron sort of thing.. I dont know if you can get away with 
varying the clock rate much tho, says not recommended, but well, have to try 
it out .. spec sheets for all the ISD stuff at
http://www.isd.com/products/
Cheers,
Dan
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.