Mouser's name for a MAT-02

[Magnus Danielson]

From: Marc Bareille <m.bareille at free.fr>
Subject: Re: Mouser's name for a MAT-02
Date: Sun, 14 Jan 2001 01:06:50 +0100

> Hi

Hi!

> I dont know the Mouser name ... but ...instead of MAT02 you can use
> SSM2210 from Analog Devices. It is a MAT02 clone in a dip 8 plastic
> package, cheaper than MAT02.. with same ( on paper)  or very close
> perfomances.

First, both the SDM2210 and the MAT-02 is being manufactured by Analog
Devices. They got into their product range when they bougth up PMI
which also had both. I still have the PMI databook that I got when I
ordered a full set of Analog Devices databooks back in 1992.

They both claim to be improved replacements of the LM394, so that
could possibly also be a usefull component. If anyone seriously tested
the LM394 in the ASM-1, then I'd love to know.

> It work well for ASM-1 vcos, i use it with a tempco ..., simply need
> to cut the pin 4 and 5 to fit pcb holes. There is a picture of this
> assembly on my web page http://m.bareille.free.fr/asm1/asm1x.htm. It's
> not an exellent picture but if you look closely there is a SSM2110
> under the tempco ...

Wounderfull!

Time to fire up the editor on that home page...

Cheers,
Magnus