On the sequencer issue...

[Goddard, Duncan]

>>> Also, I used switched pots, so I could switch the gate for each step. While
> that seemed a pretty nifty idea at the time, I didn't really think about the
> fact that the CV would send whether or not the gate was switched in, with
> the net effect that any pot that is switched off still gets the lowest CV......<<<
> 
not with you.... do you mean that if the gate time is turned right down to nothing, the connected synth is still affected by the cv for that step? or are you adjusting the gate level?

d.


***************************************************************************
CONFIDENTIALITY NOTICE

The contents of this e-mail are confidential to the ordinary user
of the e-mail address to which it was addressed, and may also
be privileged.  If you are not the addressee of this e-mail you may 
not copy, forward, disclose or otherwise use it or any part of it
in any form whatsoever.
If you have received this e-mail in error, please e-mail the sender
by replying to this message.

MTV reserves the right to monitor e-mail communications from
external/internal sources for the purposes of ensuring correct 
and appropriate use of MTV communication equipment.

MTV Networks Europe
****************************************************************************