AW: [sdiy] Patch Routing Idea...

[Ullrich Peter]

>> And take a matrix circuit for the audio matrix (MT8816 from Mitel or similar)
>
>nice up to there..
>take a close look, they will allow one input to several outputs, but not
>several inputs to one output (or several inputs to several outputs) they also 
>have a low ON resistance (<50ohms) which means you
>couldn't do the CV summing, if you could find one that let multiple inputs
>goto multiple outputs AND
>that had an on-resistance of about 10K then you'd be talking...

That's right.

For mixing/summing purposes we used one chip per ouput with summing
resistors on every input... I made a board with 8 MT8816 on 1 Euro-PCB for 
the company I am working for...

Ciao
Peter

        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------
                   Ing. Peter Ullrich         mailto:ullrich at kapsch.net
                   Homepage: www.ullrich.at.tt , http://come.to/ullrich
                   http://www.geocities.com/SiliconValley/Heights/3586/
                   Hardware & Software Developer /  Electronic Musician
   .oooO           KAPSCH AG / ECCN                    Vienna / Austria
   (   )   Oooo.            Traffic Control and Transmission Technology
----\ (----(   )-------------------------------------------------------
     \_)    ) /
           (_/