[sdiy] Re: [AH] simple ASM-1 questions

[Nicholas Pelkey]

> Up! It should point up! Up means away from the trimpot.

thanks.... the .pdf and Gene's caution in the literature where a tad misleading.

> > Next question.  Somehow after ordering from the parts list I ended up with a few 33 radial ceramic caps?  Any hints on why?  Are these the ones that are supposed to piggyback the 560k in the VCA?
> 
> VCF?

No VCA.... 

"This module is pretty easy.  Make sure to use normal signal diodes like the 1N4148 or 1N914.  The op-amp can be anythng dual - TL082, LM358, 1458, etc.  There may be some hi- frequency oscillation on the VCA output - if there is, add about a 30pf cap across the (-) input and output amp, across the 560K resistor.  You can solder this on the back side if you want."

from assembly notes 1.2 by Gene Stopp

So do I use the 33 radial ceramic for that?
Later,
Nick P




-------------------------------------------------------------
Sign up for ICQmail at http://www.icq.com/icqmail/signup.html