[sdiy] Re: [coil] OT : Analogue synths (fwd)
harry
harrybissell at prodigy.net
Sat Feb 17 19:38:14 CET 2001
Yes: The early PAiA 2720 synths used Pin Jacks (Tip Plugs) that were a
standard on meters prior to bananna jacks. Mouser has 171-0111 and 171-0112
(red and black) in solder type, and 530-105-0302-1 and 530-105-0303-1
(red and black) in solderless type. The wire used was test probe wire in
miniature
size (20ga) Mouser 602-1632-100-03 (Alpha) or similar. available in red and
black.
The originals had black plastic handles (solder) and red wire.
The 1/8 phone plugs are standard.
H^) harry
Matti wrote:
> Anybody know what sort of cables this person is talking about?
>
> --------------------------------------------
> Hell ain't just a nother place to visit when you're dead, paradise is in
> your mind so feed your head.
>
> ---------- Forwarded message ----------
> Date: Fri, 16 Feb 2001 17:48:30 EST
> From: Lthrpete at aol.com
> Reply-To: coil at hollyfeld.org
> To: coil at hollyfeld.org
> Subject: Re: [coil] OT : Analogue synths
>
> In a message dated 02/05/2001 6:11:02 PM Central Standard Time,
> matti at devo.com writes:
>
> << http://www.paia.com/theremax.htm >>
>
> I recently acquired an OLD Paia electronics "build it yourself" synth circa
> 1974 or so. The only problem is that I don't have any of the black/red patch
> cables that it requires. I called Paia and they weren't very helpful, with
> the outcome being that I may have to build the cables myself. Would anyone
> on the list happen to know where I might be able to find some functional
> cables without having to do this??
>
> Also, I recently picked up a Korg Polysix, but, of course, I don't have a
> manual. Any leads on where to get information on this synth would be greatly
> appreciated, especially concerning the programming and tape in/out functions.
>
> Thanx -
>
> Pete
> ____________...oooOOO---coil at hollyfeld.org---OOOooo..._____________
> To unsubscribe send "unsubscribe" to coil-request at hollyfeld.org
> To unsubscribe your at email.com send "unsubscribe your at email.com"
> To unsubscribe from the digest send to coil-digest-request at hollyfeld.org
> http://www.hollyfeld.org/heaven/elists/coil.phtml
> http://www.brainwashed.com/coil
More information about the Synth-diy
mailing list