[sdiy] God! Do I need a simple latch switch!

[tomg@efm]

See if you can get an idea fom here Ken. When pin-8 of
the 4069 is 1 pin-6 is 0. Close a momentary switch or send
it a high going pulse and pin-8 = 0 , pin-6=1. 
http://www.geocities.com/efm_gc/cbook/pics/seq1_sd2.gif

Tom


> Harry et al, I'm really wanting a 'momentary feel'
> push switch instead of a toggle spdt or dpdt, it's
> signal not audio BTW. Thanks for your suggestions so
> far, everyone.
> I had actually started to think about manually
> clocking (switching) a 555 to generate logic 1 and
> logic 0, for each 'push', you get a peak and a trough
> from a square output, in fact I'd use anything that
> will give that output to drive the'switching in the
> 4066/16...thats how I think!!!
> regards, Ken