[sdiy] Mackie Potmeter

[Theo]

Could be Panasonic, they make good pots and faders for a reasonable price.
But the pots you describe can be had from Bourns, Alps, Panasonic and
others.

Theo


----- Original Message -----
From: Jeroen Proveniers <J.Proveniers at orga.nl>

> > -----Original Message-----
> > From: Heiko van der Linden [mailto:h.j.vanderlinden at el.utwente.nl]
> > Sent: Tuesday, February 06, 2001 10:56 AM
> > To: 'synth-diy at node12b53.a2000.nl'
> > Subject: [sdiy] Mackie Potmeter
> >
> >
> >
> > Hi All,
> >
> > I'm servicing a mackie mixer (1604) and I saw that there's nice
> > potmeters in there. Especially the stereopotmeters are okay since
> > they have all the pins on the same piece of board so they are in plane
> > and not on top of each other like in Piher stereo pots.
> > Another nice thing is that there's a metal enclosure around
> > the potmeter
> > housing that has pins to solder the house to a pcb.
> >
> > Does anyone know which brand these potmeters are.
> > They only say the value and JPN (made in Japan ?).
> > And does anyone know where I can buy these ?
>
> I bet these are ALPS potmeters.
>
> JJ