[sdiy] archives down?

[Theo]

It depends on what your doing with the 072.
But I think if you open up a 072 to put a cap in,
it won't oscillate anymore anyways. ;-P

Instead you might wana try:
100n from the supply pins to GND,
and about 22p to 33p parallel to the feedback resistor.
A 100R to 1K resistor on the output is also recommended if you
are driving cap on the output or (long) cables.

Cheers,
Theo


From: <ElmacacoX at aol.com>

> Are the Archives working somewhere?  the old link comes up but the
searches
> don;t.
>
>
> if anyone happens to remember where you put the cap in a TL072 to prevent
it
> from oscillating, and what value of cap it is, I'd appreciate it.
>
> I seem to recall it was in reference to replacing 4558's with TL072's.
>
> thanks
>
> Eduardo
>