[sdiy] 4017 troubleshooting update

[the mystic satin]

ahhhh! that makes a lot of sense, the other mismatched #'s were simply
illegible on the schematic and my guesses were wrong (8 looked like a 6
etc...)  But.. check this one out... the schematic has supply for the 4093
labeled as pin 8, while the datasheet lists supply as pin 14... 

any guesses?
I love math...
----------
>From: matti <matti at devo.com>
>To: synth <synth-diy at dropmix.xs4all.nl>
>Subject: Re: [sdiy] 4017 troubleshooting update
>Date: Sat, Aug 25, 2001, 3:33 PM
>

>
>The counting starts at 0. So,the _first_ output corresponds to _Q0_, pin
>3. Go ahead and shake your first at those silly math types. Maybe you'll
>start a revolution.
>
>On Sat, 25 Aug 2001, Gavin Russom wrote:
>
>> hi all, continuing to troubleshoot the 4017 sequencer schematic, thanks for
>> the tip on the output resistor.  It seems to me that the pins on the 4017 IC
>> are also labelled wrong... the schematic has the output pins labelled (in
>> order of sequencer step)
>> step 1 = pin 3
>> step 2 = pin 2
>...
>
>
>-
>finland red
>germany black
>egypt white
>