[sdiy] MC-202 sequencing question

[Jon Darby]

My 202 had been modified by the previous owner to do exactly this with
individual 1/8" CV, Gate, and Trig outs. When I get home I'll crack it open
and compare it against the schematic and take pictures of the work for you
if you are interested. I've never connected the modded outs to my Moog, I'll
do that tonight, too, and let you know how it works out. As a matter of fact
I've never used both channels at the same time, how do you program the
second channel? Thanks a pantload.

Your pal,
Jon Darby

----- Original Message -----
From: "cacofone" <pulse8 at goodtimetribe.com>
To: <analogue at hyperreal.org>; "Synth DIY" <synth-diy at dropmix.xs4all.nl>
Sent: Tuesday, August 14, 2001 10:22 AM
Subject: [sdiy] MC-202 sequencing question


> Hello,
> I've got an MC-202 I'm using triggered by an MC-303 (Kenton pro-solo for
> the midi/CV conversion) and I'm wanting to building a two-oscillator VCO,
a
> VCF, and an ADSR. I'd like to have the MC-202 triggering this using simple
> CV/Gate outputs on the second channel on my mc-202. Is it possible to do
> this? I was thinking I might have to put an input in to trigger the
> step-sequencer (like the EXT-CLK) in on an SH-101... anyone got any ideas?
>
> Thanks,
> Joshua
>
>
> Pulse 8 / nKode / cacofone [aim:jkerseyVCSO]
> http://www.goodtimetribe.com - Good Time Tribe
> http://www.mp3.com/stations/d-r-e-a-m DREAM Radio Station
> http://www.mp3.com/pulse8 http://www.mp3.com/nkode
http://www.mp3.com/cacofone