[sdiy] Need Some Advice (blacet/wiard mini-wave)

[Grant Richter]

Hello All,

Just as a follow up, John discovered a missing trace on the new Mini-Wave PC
board. This left a CMOS input floating and, under some circumstances, would
shut off the "start conversion" clock to the wave and bank A/Ds.

The problem is now know and being corrected.

The fact that John found this subtle problem so rapidly and has responded so
well, shows the high quality of the company he is running.


It is not how you slip that counts, but how you recover. - Vince Lombardi


> 
> while we're on the subject possibly someone could give some help with my
> blacet/wiard mini wave.  i built the thing in a couple hours, everything
> looked great, best looking soldering i've done yet methought.  yet when
> i powered it up the knobs don't seem to change the waves or banks.  i
> wrote john blacet but haven't heard from him and imagine he's probably
> buried trying to get the module out.
>