[sdiy] Paia MIDI Fader

[Rhen, Kris]

Poly aftertouch is not - it requires a NOTE byte as the second, then a
value.  By spec, Channel aftertouch is NOT 14-bits.  Its a 2-byte message,
though the third could be used for a MSB/LSB config I suppose but it isn't
spec'd that way I believe.

http://www.harmony-central.com/MIDI/Doc/table1.html
http://www.harmony-central.com/MIDI/Doc/table4.html

Technically MOST MIDI CCs are 14-bits if you use the LSB and MSB
configuration (part of the spec) but yes, few synths really do it.  Many
synths implement pitch bend with only recognition of the MSB also.

http://www.harmony-central.com/MIDI/Doc/table3.html

KRIS

> -----Original Message-----
> > Now someone told me that aftertouch is 14 bits but it is rarely
> > implemented that way by the controller. Cost I guess. Shame.
> 
> Oh.... i thought the only 14-bits parameter would have been the
> pitch-bend.


**********************************************************************
This email and any files attached are confidential and
intended solely for the addressee.  This email message
has also been swept for computer viruses by
MIMEsweeper  (www.mimesweeper.com)
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20010801/5eef04ee/attachment.htm>