[sdiy] preventing corrosion on bare traces

[Grant Richter]

Tin plating makes them look cooler but is not required.

Tin plating solution

http://www.web-tronics.com/er-18.html

> From: patchell <patchell at silcom.com>
> Reply-To: owner-synth-diy at node12b53.a2000.nl
> Date: Sun, 29 Apr 2001 07:42:20 -0700
> To: synth-diy at node12b53.a2000.nl
> Subject: Re: [sdiy] preventing corrosion on bare traces
> 
> 
> No, this is nothing to worry about.  Copper is nice in that only the
> surface will oxidize, and that is it.
> 
> media at mail1.nai.net wrote:
> 
>> I've noticed that "vectorbords" and newly etched PCB's tarnish very
>> quickly.  I can't help but think that this will eventally corrode the
>> traces to the point where it effects the circuit.  What is the best way to
>> protect the copper??  Is there some sort of spray??  I wouldn't want
>> anything that would prevent future modifications and repairs.
>> 
>> THANX!!
> 
> --
> -Jim
> ------------------------------------------------
> * Visit:http://www.silcom.com/~patchell/
> *-----------------------------------------------
> *I'm sure glad Merry Christmas comes just once a year
> * -Yogi Yorgensen
> ------------------------------------------------
> 
> 
> 
>