[sdiy] cv scaler

[Rhen, Kris]

Hi all, new to the list (and DIY)

I'm designing a similar device, two input summer, but mine also will invert
and rectify either or both of the CVs on a switch, as well as amp/attenuate
and add bias.  I've been working on it in Electronics Workbench but got
sidetracked for a while. Fitting a rectifier (Diode bridge) into the works
has me a little befuddled though, but I'll get it :-)  Wanna build like a
bank of four of these for my A100 frame.
Later,
KRIS

-----Original Message-----
>For my next mini-project, I want to build a circuit that will let me
>either amplify or attenuate any control voltage (up to audio
>frequencies), and be able to add a plus or minus offset.  I'm
>envisioning something with two pots - a scale and an offset - both with
>center detents.  With both in the center position, the signal would


**********************************************************************
This email and any files attached are confidential and
intended solely for the addressee.  This email message
has also been swept for computer viruses by
MIMEsweeper  (www.mimesweeper.com)
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20010422/493cd9ab/attachment.htm>