[sdiy] Are these Pots OK?

[ElmacacoX at aol.com]

Hi All,  I am ready to order more stuff for the SBM project, and rather than 
use the pots suggested on the parts list, I thought I'd use these. [Mouser  
31CR405].  they are a bit cheaper and smaller than stock pots, and I was 
curious to know if there is something in the fine print that makes them not 
as good as stock pots?  they're rated at .1Watts, is that enough?  here's the 
spec sheet.

Url:   
http://www.mouser.com/specsheets/143117.pdf

thanks

Ed