[sdiy] sdiy, real ring modulator schematics

Happy Harry paia2720 at hotmail.com
Fri Apr 13 00:26:18 CEST 2001


As I understand it... no. The diodes are biased on by the carrier, and the 
signal is modulated by the varying resistance of the diodes... so
the signal should be small and NOT turn the diodes on.

Yes the signal is AC coupled, but the carrier is not. This is like a
VCA as used in the Koeg MS-50 filter... but it is four quadrant instead of 
two.

I think....   ;^)

H^)  harry


>From: Grant Richter <grichter at asapnet.net>
>Reply-To: grichter at asapnet.net
>To: <harrybissell at prodigy.net>, <buchi at takeonetech.de>,   
><synth-diy at node12b53.a2000.nl>
>Subject: Re: [sdiy] sdiy, real ring modulator schematics
>Date: Thu, 12 Apr 2001 17:19:24 -0500
>
>A true "ring" modulator is going to have a lot of distortion due to the
>diode drops, which act as waveform base clippers? As I understand it, it
>also needs large signal amplitude, enough to turn on the diodes (greater
>than 1.4 volt peak to peak)? Is that right?
>
>Also it is AC coupled because of the transformers. RCA suggests using a
>CA3019 diode array to reduce carrier feedthru. But just hand matched 
>1N4148s
>should do the same thing?
>
>
> > From: "Happy Harry" <paia2720 at hotmail.com>
> > Reply-To: harrybissell at prodigy.net
> > Date: Thu, 12 Apr 2001 15:05:14 -0000
> > To: buchi at takeonetech.de, synth-diy at node12b53.a2000.nl
> > Subject: Re: [sdiy] sdiy, real ring modulator schematics
> >
> > The "Ring Modulator" is usually a diode bridge fed from
> > transformers.  Balanced Modulator is a four quadrant multiplier.
> > All Ring Modulators are Balanced Modulators... not all Balanced
> > Modulators are "ring" modulators.
> >
> > Same applies to "frogs" and "amphibians"
> >
> > H^) harry
> >
> >
> >> From: Michael Buchstaller <buchi at takeonetech.de>
> >> Reply-To: buchi at takeonetech.de
> >> To: synth-diy at node12b53.a2000.nl
> >> Subject: Re: [sdiy] sdiy, real ring modulator schematics
> >> Date: Thu, 12 Apr 2001 14:30:01 +0200
> >>
> >>
> >> Is not the balanced modulator the same as an ring modulator ?
> >> I thought that were only two names for the same thing. Am i wrong ?
> >> If yes, what is the difference ?
> >>
> >>
> >> -Michael Buchstaller
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
>
>

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com




More information about the Synth-diy mailing list