crumar / roland questions.

[Haible Juergen]

	>I have a crumar peformer, I've bugged you all before about it, but,
I have 
	>another little problem. The tuning pot in the back is a piece of
junk. I 
	>cannot get it to 440. It seems to "jump" pitches instead of glide
when I turn 
	>it. I can get it to just about 440, and then i turn it just a
little bit 
	>more, and the pitch just sort of jumps up a little above 440. I
can't explain 
	>it very well. I don't think that it's dirty, I think that's just
how it is. I 
	>wanted to ask if anybody knew if there was something I could
replace it with. 
	>If there was a pot that would work better and would be compatible. 

Simply replace the pot. It's panel mounted, so anything with the right value
that fits into the hole will do. As for value, I remember it was pretty low,
like 1k or 2.5k . Measure it, get a linear pot of the same value, and
everything
should be ok. (I did this once on one of my Performers.)

JH.