mini moog clone

[Don Tillman]

   Date: Mon, 18 Sep 2000 15:49:55 +0200
   From: riccardo <boldman at interplanet.it>

   The easiest way is to keep the old osc board design. IMHO the
   necessary additions are: PWM instead of fixed squares, a dedicated
   LFO, VCO sync, an overall octave switch (takes all 3 VCOs up or
   down), four stages envelope (ADSR), rotary switch to address vco or
   noise signal to the ext in, different resistance value for the cut
   off and emphasis pots for a more linear response (not like real
   mins where nothing happens from 0 to 8 and it is all between 8 and
   10), and (why not?) an envelope for VCO's pitch (so I can play
   Hoedown on it).

That's getting pretty close to an ARP Odyssey.  :-)

  -- Don

-- 
Don Tillman
Palo Alto, California, USA
don at till.com
http://www.till.com