Sh-101 to TOM Clock Sync!

[danial stocks]

ke this work!
>
>
>When using an external clock to run the SH-101, the sequencer runs at the
>actual speed of the incoming pulses.  In other words... if you want 1/8 
>notes
>to play on the sequencer, send the clock pulses at 1/8 note intervals.  If
>you want 16th notes, send 16th note clock pulses.
>

Which means at the din sync of 24ppq, for 1/4 note, div by 24, 1/8 = div 12 
etc. easiest would be to use a 4017 set for /3 [put o/p 4 to reset] and feed 
the o/p of this divider into a 4024 to pick off note val pulses etc.. if you 
had a switch on the 4017, you could select to send 1/3, 1/6 notes etc as 
well..
Cheers,
Dan
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.