OBxa Voice problem

[Gerry Dahl]

Hi,
I would check all of your connections first. Cables that connect the board
and
socketed chips. This is easier and quicker to start with. Also you may have
bad multi-turn trim pots and they'll keep fluctuating in resistance.

Hope this helps.

Gerry Dahl

Keep On Moogin'



-----Original Message-----
From: tech4 at thirdcollective.com <tech4 at thirdcollective.com>
To: Synth Diy <synth-diy at node12b53.a2000.nl>
Date: Tuesday, October 31, 2000 7:51 AM
Subject: OBxa Voice problem


>I have 2 card now that are out of tune and won't stay in tune. Is that a
>cap problem? If replace all the caps on the board can that take care of
>it? I seem to be stuck on a solution...
>
>Luis
>