Interfacing sram with cu Parallell port

[René Schmitz]

You might want to take a look at my printer port cv interface, I've
included the C source for the windows driver, as well as some info on the
port programming, pinout etc. http://www.uni-bonn.de/~uzs159/cvmidi.html

Bye,
 René


At 01:28 29.10.00 +0200, *Star Project wrote:
>Hi eveyone...
>
>As this subject seems a little off topic I can only say
>that at least it is for use in a synth. I want to interface
>3 sram chips to the computers Printer port for writing and
>reading memory. 12 address lines and 4 I/0 lines 1 CS line
>1 WE line and 1 OE line will be used. Or the OE could be
>directly connected to GND i suppose.
>So I guess my question is how do I interface thoose sram chips
>with the printer port. And does anyone know any sites with 
>facts on programming win applications in c++ using comunication
>thru the Printer Port?
>
>In big need of help
>/ Andreas H
>
>
>
-- 
uzs159 at uni-bonn.de
http://www.uni-bonn.de/~uzs159