Interfacing sram with cu Parallell port

[Magnus Danielson]

From: "*Star Project" <ampe at swipnet.se>
Subject: Interfacing sram with cu Parallell port
Date: Sun, 29 Oct 2000 01:28:30 +0200

> Hi eveyone...

Tja!

> As this subject seems a little off topic I can only say
> that at least it is for use in a synth. I want to interface
> 3 sram chips to the computers Printer port for writing and
> reading memory. 12 address lines and 4 I/0 lines 1 CS line
> 1 WE line and 1 OE line will be used. Or the OE could be
> directly connected to GND i suppose.
> So I guess my question is how do I interface thoose sram chips
> with the printer port. And does anyone know any sites with 
> facts on programming win applications in c++ using comunication
> thru the Printer Port?

OK, try this baby out for a test-spin and let me know what you think:
http://www.lvr.com/parport.htm

The troubles usually lies in getting the parallel port programming
work. These recent chips seems to broken at times and documentation
isn't really on the strong side.. (sigh!)

Maybe I should take up my parallel port project again...

Cheers,
Magnus