sh-101 calibration

[Rob]

I second this.. quite a few of my sh101 sliders are bad in this manner, and
I am still trying to source new ones.

Rob

----- Original Message -----
From: "Theo" <t.hogers at home.nl>
To: "sandeep" <sghael at stanford.edu>; <synth-diy at node12b53.a2000.nl>
Sent: Friday, October 20, 2000 8:27 PM
Subject: Re: sh-101 calibration


> Maybe the sliders are dirty or just worn out.
> Had exactly the same problem with the data slider on my DX.
> Slider down, low resistance, move a little bit up resistance jumps sky
high.
>
> In the DX case it was time for a new slider.
>
> Bye, Theo
>
> ----- Original Message -----
> From: sandeep <sghael at stanford.edu>
> To: <sandeep at gigabeat.com>
> Cc: <synth-diy at node12b53.a2000.nl>
> Sent: Friday, October 20, 2000 11:54 PM
> Subject: sh-101 calibration
>
>
> >
> > does anyone else have this problem w/ their 101:
> > the ADSR envelope sliders are super sensitive at the
> > minimum setting, and then basically do nothing past about the
> > 2nd notch.... (about 1/5) of the way up the slider.
> >
> > im thinking i need to recalibrate the synth.  i recall
> > coming across a posting or website that documents
> > how to recalibrate an sh101, but i cant find it anymore..
> >
> > anyone have any leads ?
> >
> > thanks!
> >
> > .minimal.pleasures.
> >
> >
> >
>
>