Once again The Trident!

[Haible Juergen]

	>+ linear current regulator (BJ language)

Linear voltage controlled current source (;->)

	>And so it can keep going on for several minutes, and probably
	>hours and newer go the entire cycle (360 degrees)!!
	>It never beats, it just simply phases around!!

I'm not yet sure what to make of this. Do you have the
lower octaves added in ? - then the saw core, running at
higer frequency, could be synced, and you'd only notice
less phase jumps than expected in the composite lower
octave range. (just a guess)


	>But if we take all those "found" issues and uses a different CCO
	>core,lets say we take a Moog /Source/Rouge/etc core and drive
	>it with the Trident muxed expo converter?

Some Moog VCOs used rounded reset pulses for the discharge transistor.
But then this means longer than necessary reset times, and the need for
HFT compensation. And more deglitching if you want to convert the saw into
triangle.

I'm determined to use the Korg scheme in the PolyModular, but you can
bet that I'll locate the VCOs that belong to one voice wide apart.

JH.