nonsense: "new" oscilator core

[Martin Czech]

:::-the usuall offset voltage problems, though you can buy arround 100uV
::: today from the shelf. Typical max input voltage should be 1V,
::: so that's 100uV/1V ->0.01% error. Not that bad.

Yes , with V1, V2 = 1V. But at the lower side there will be 1mV,
so 10% untrimmed error!  Ok with V1max ~ 5V, 1:1000 range
and trimming we might get to 30uV/5mV ~ 0.6% error, that's
still a lot,and then a lot of triming is required for the
reference voltages as well...

This could get very tough for low control voltages...


m.c.