November 2000 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Nov 1 00:13:18 CET 2000
Ending: Thu Nov 30 23:33:54 CET 2000
Messages: 872

• SID vs. NMOS tech (fwd)   >>>marjan<<<
• Envelope follower for my vocoder...   >>>marjan<<<
• Other elektor stuff   >>>marjan<<<
• Prophet VS schematics   >>>marjan<<<
• R.A. Moog schematics   >>>marjan<<<
• R.A. Moog schematics - ALL!   >>>marjan<<<
• CEM3310s for sale   >>>marjan<<<
• CEM3310s for sale   >>>marjan<<<
• Some sequencer fustration and CD40xxB replacement question.   >>>marjan<<<
• power supply problem   >>>marjan<<<
• Small Clone   >>>marjan<<<
• MIDI interface?   >>>marjan<<<
• For all Yanks on the list.   >>>marjan<<<
• For all Yanks on the list.   Mark Abbott
• CV to Midi NOTE:   Tony Allgood
• new Formant book arrived   Tony Allgood
• who to manage 1/X ?   Tony Allgood
• CEM3310s for sale   Tony Allgood
• CEM3310s for sale   Tony Allgood
• More about 3310 and envelopes   Tony Allgood
• The long lost 2SK 30(O)   Tony Allgood
• More about 3310 and envelopes   Tony Allgood
• CEM3310s for sale   Tony Allgood
• OT: CD-RW problems   Tony Allgood
• CD-RW problems   Tony Allgood
• Oakley Stuff   Tony Allgood
• Oberheim,Memory Moog and naked men in africa!   Tony Allgood
• Small Clone   Tony Allgood
• Small Clone   Tony Allgood
• Oakley Stuff: New circuits   Tony Allgood
• Synth-cordian   Tony Allgood
• Moog Glide Modification   Tony Allgood
• oberheim obmx problem   Aln
• MC202 problem   Daniel Araya
• MC202 problem   Daniel Araya
• DR-55 trig in mod   Daniel Araya
• PAiA 4700 modular panel dimensions   Daniel Araya
• PAiA 4700 modular panel dimensions   Daniel Araya
• DR-55 trig in mod   Daniel Araya
• Any OSCar owners out there???   Daniel Araya
• Roland Space Echo   Daniel Araya
• Turntable Modification   Richard Atkinson
• SID vs. NMOS tech (fwd)   Richard Atkinson
• Fwd: Re: Quad Opamps? (Was Re: ASM-1 PCB availability?)   Sarah Balitsky
• Vocoder design   Scott Bernardi
• Vocoder design   Scott Bernardi
• Vocoder design   Scott Bernardi
• Vocoder design   Scott Bernardi
• Vocoder design   Scott Bernardi
• Circuit simulation   Scott Bernardi
• TL071/TL081   Scott Bernardi
• TL071/TL081   Scott Bernardi
• MAT04 for ASM-1's   Scott Bernardi
• Midi the other way round...   Harry Bissell
• ohm's law, and 555 question   Harry Bissell
• Chaos LFO : who to manage 1/X ?   Harry Bissell
• Small corroded terminals   Harry Bissell
• power supply problem   Harry Bissell
• CD-RW problems   Harry Bissell
• OT... But Who Else Can I Tell ?   Harry Bissell
• Oberheim,Memory Moog and naked men in africa!   Harry Bissell
• neon indicators   Harry Bissell
• CoilRolling fun!   Harry Bissell
• stupid envelope follower idea   Harry Bissell
• One thing to be thankful for [OT]   Harry Bissell
• Triangle VCO help please   Harry Bissell
• BassStation Filter: What is it?   Harry Bissell
• BassStation Filter: What is it?   Harry Bissell
• OTAs and Harry's flame bait BDDs   Harry Bissell
• OTAs and Harry's flame bait BDDs   Harry Bissell
• For all Yanks on the list.   Harry Bissell
• For all Yanks on the list.   Harry Bissell
• reverse engineering and help with a plug...   Harry Bissell
• For all Yanks on the list.   Harry Bissell
• Signal Presence Detectors?   Harry Bissell
• PCB programs and etching companies?   Harry Bissell
• Synth-cordian   Harry Bissell
• dreams   John E Blacet
• Blacet News for November   John E Blacet
• Some sequencer fustration and CD40xxB replacement question.   John E Blacet
• Time Machine Kits   John E Blacet
• Using 4XXX family for new designs   John E Blacet
• freq. mult.   John E Blacet
• Grand entry into the world of noise.   Arun Bohm
• CoilRolling fun!   Arun Bohm
• Subharmonics?   Arun Bohm
• Pro Audio Schematics   BrightBoy
• Anyone experienced in repairing a Matrix-1000?   David Brown
• Turntable Modification   Chris Bryant
• For all Yanks on the list.   Chris Bryant
• Embedded processors for DIY projects ?   Michael Buchstaller
• Embedded processors for DIY projects ?   Michael Buchstaller
• Embedded processors for DIY projects ?   Michael Buchstaller
• newbie, how to do etching, what kind of pen?   Michael Buchstaller
• Embedded processors for DIY projects ?   Michael Buchstaller
• Embedded processors for DIY projects ?   Michael Buchstaller
• Embedded processors for DIY projects ?   Michael Buchstaller
• sid chip 8580   Michael Buchstaller
• SB joystickport for MIDI   Michael Buchstaller
• 9720 VCO finished and a small problem   Michael Buchstaller
• MIDI-Thru problem ?   Michael Buchstaller
• Rack   Michael Buchstaller
• RV: Korg Ex-800   David Castillo
• Atmel and dreams!   Scott Chicoine
• Atmel and dreams!   Scott Chicoine
• TL071/TL081   Tony Clark
• MAT04 for ASM-1's   Tony Clark
• DIY PCB plated thru holes?   Tony Clark
• ASM-1 VCO testing   Tony Clark
• neon indicators   Tony Clark
• ASM-1 VCO testing (fwd)   Tony Clark
• Synth Module Board Pics   Tony Clark
• PCB programs and etching companies?   Tony Clark
• DIY Silkscreen (Was: Panels)   Aaron Cram
• PCB programs and etching companies?   Aaron Cram
• Transistor matching circuit, revisited   The Old Crow
• [motm] MOTM/MIDI Part #2   The Old Crow
• Comprehensive user interface (was Re: [motm] MOTM/MIDI Part #2)   The Old Crow
• Embedded processors for DIY projects ?   The Old Crow
• Poly-800 Schematics?   The Old Crow
• pic16f84   The Old Crow
• not quite off topic but, 8MHZ XTALS   The Old Crow
• PAiA 4700 modular panel dimensions   The Old Crow
• Embedded processors for DIY projects ?   Curtin, Steven D (Steven)
• Racking Minimoog Oscillators   Tim Curtis
• CLS-222 on eBay   Tim Curtis
• Moog Modular mailing list   Tim Curtis
• TL071/TL081   Tim Curtis
• ua739   Tim Curtis
• Allen Bradley   Tim Curtis
• OT - Hammond Auto-Vari 64 (repair question)   Tim Curtis
• vocoders   Martin Czech
• schematic for a 24db or steeper Bandpass filter????   Martin Czech
• schematic for a 24db or steeper Bandpass filter????   Martin Czech
• test: delete me!   Martin Czech
• Eclectic Question   Martin Czech
• new Formant book arrived   Martin Czech
• Embedded processors for DIY projects ?   Martin Czech
• Envelope follower for my vocoder...   Martin Czech
• Chaos LFO : who to manage 1/X ?   Martin Czech
• TL071/TL081   Martin Czech
• TL071/TL081   Martin Czech
• TL071/TL081   Martin Czech
• Vocoder design   Martin Czech
• of topic: C programming style   Martin Czech
• thanx: Re: of topic: C programming style   Martin Czech
• stupid envelope follower idea   Martin Czech
• stupid envelope follower idea   Martin Czech
• stupid envelope follower idea   Martin Czech
• stupid envelope follower idea   Martin Czech
• stupid envelope follower idea   Martin Czech
• stupid envelope follower idea   Martin Czech
• Bode Barber Pole Phaser   Martin Czech
• triangle VCO help please   Martin Czech
• Signal Presence Detectors?   Martin Czech
• freq. mult.   Martin Czech
• revisiting that Bode Phaser   Martin Czech
• freq. mult.   Martin Czech
• Signal Presence Detectors?   Martin Czech
• revisiting that Bode Phaser   Martin Czech
• freq. mult.   Martin Czech
• revisiting that Bode Phaser   Martin Czech
• RE(2): revisiting that Bode Phaser   Martin Czech
• Desperatly seeking Paul Maddox   Magnus Danielson
• UK Synth-folk meeting   Magnus Danielson
• ASM-1 PCB availability?   Magnus Danielson
• More about 3310 and envelopes   Magnus Danielson
• More about 3310 and envelopes   Magnus Danielson
• Some sequencer fustration and CD40xxB replacement question.   Magnus Danielson
• OB-8   Magnus Danielson
• resistors,Bc168 replacement   Magnus Danielson
• MAT04 for ASM-1's   Magnus Danielson
• OT... But Who Else Can I Tell ?   Magnus Danielson
• MAT04 for ASM-1's   Magnus Danielson
• OB-8 calibration error   Magnus Danielson
• OB-8 calibration error   Magnus Danielson
• OB-8 calibration error   Magnus Danielson
• of topic: C programming style   Magnus Danielson
• That OB-8 thing again...   Magnus Danielson
• thanx: Re: of topic: C programming style   Magnus Danielson
• ASM1-X, Mutron biphase clone, DCAM8x8...   Magnus Danielson
• ASM-1 VCO testing   Magnus Danielson
• [AH] RE: OB-8 calibration error   Magnus Danielson
• stupid envelope follower idea   Magnus Danielson
• stupid envelope follower idea   Magnus Danielson
• Small Clone   Magnus Danielson
• Small Clone   Magnus Danielson
• Triangle VCO help please   Magnus Danielson
• OB-8 Service Manual and ECOs   Magnus Danielson
• Triangle VCO help please   Magnus Danielson
• OB-8 Service Manual and ECOs   Magnus Danielson
• For all Yanks on the list.   Magnus Danielson
• Bouncing mails   Magnus Danielson
• For all Yanks on the list.   Magnus Danielson
• For all Yanks on the list.   Magnus Danielson
• reverse engineering and help with a plug...   Magnus Danielson
• freq. mult.   Magnus Danielson
• freq. mult.   Magnus Danielson
• more PPG 2.3 boot failure   Magnus Danielson
• audio jack size between 1/8" and 1/4"?   Jon Darby
• freq. mult.   Jon Darby
• freq. mult.   Jon Darby
• Moog Glide Modification   Jon Darby
• Moog Glide Modification   Jon Darby
• Embedded processors for DIY projects ?   Ingo Debus
• [motm] MOTM/MIDI Part #2   Ingo Debus
• Embedded processors for DIY projects ?   Ingo Debus
• CEM3310s for sale   Ingo Debus
• Chip creep, was Re: CEM3310s for sale   Ingo Debus
• faceplate white on black   Ingo Debus
• CoilRolling fun!   Ingo Debus
• DIY PCB plated thru holes?   Ingo Debus
• CD-RW problems   Robert Donker
• BC182, BC212   Fahl, Romeo
• unsubscribe   Lincoln Fong
• Embedded processors for DIY projects ?   Fraser, Colin J
• newbie, how to do etching, what kind of pen?   Fraser, Colin J
• List not working ?   Fraser, Colin J
• Embedded processors for DIY projects ?   Fraser, Colin J
• WARNING! VIRUS!   Fraser, Colin J
• WARNING! VIRUS!   Fraser, Colin J
• The long lost 2SK 30(O)   Fraser, Colin J
• Ringing oscilators/Re: More about 3310 and envelopes   Fraser, Colin J
• The long lost 2SK 30(O)   Fraser, Colin J
• Western Harmony   Fraser, Colin J
• stupid envelope follower idea   Ian Fritz
• stupid envelope follower idea   Ian Fritz
• stupid envelope follower idea   Ian Fritz
• stupid envelope follower idea   Ian Fritz
• CV to Midi NOTE:   Dan Gendreau
• [motm] MOTM/MIDI Part #2   Glen
• Poly-800 Schematics?   Glen
• Poly-800 Schematics?   Glen
• WARNING! VIRUS!   Glen
• WARNING! VIRUS!   Glen
• WARNING! VIRUS!   Glen
• vocoders   Goddard, Duncan
• Midi the other way round...   Goddard, Duncan
• Turntable Modification   Goddard, Duncan
• TL071/TL081   Goddard, Duncan
• Frequency Shifters   Goddard, Duncan
• rudi and the moog   Goddard, Duncan
• Some sequencer fustration and CD40xxB replacement question.   Goddard, Duncan
• More about 3310 and envelopes   Goddard, Duncan
• More about 3310 and envelopes   Goddard, Duncan
• power supply problem   Goddard, Duncan
• For all Yanks on the list.   Goddard, Duncan
• wide stereo (was reverse engineering and help with a plug...)   Goddard, Duncan
• DIY PCB plated thru holes?   Mike Granger
• LM331 V-F Converter   Scott Gravenhorst
• Question About Pots   Scott Gravenhorst
• SB joystickport for MIDI   Scott Gravenhorst
• SB joystickport for MIDI (errata)   Scott Gravenhorst
• Synth DIY Web Sites Dilema   Scott Gravenhorst
• OT... But Who Else Can I Tell ?   Scott Gravenhorst
• V/Oct scaling with 566 VCO   Scott Gravenhorst
• MAT04 for ASM-1's   Scott Gravenhorst
• Thomas Henry Tunable Noise Source Question   Scott Gravenhorst
• Thomas Henry Tunable Noise Source Question   Scott Gravenhorst
• neon indicators   Scott Gravenhorst
• Thomas Henry Tunable Noise Source Question   Scott Gravenhorst
• Bode Barber Pole Phaser   Scott Gravenhorst
• One thing to be thankful for [OT]   Scott Gravenhorst
• OTAs and Harry's flame bait BDDs   Scott Gravenhorst
• OTAs and Harry's flame bait BDDs   Scott Gravenhorst
• Triangle VCO help please   Scott Gravenhorst
• Seeking DR envelope ideas   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• freq. mult.   Scott Gravenhorst
• Synth-cordian   Scott Gravenhorst
• freq. mult.   Toby Graves
• freq mult   Toby Graves
• Embedded processors for DIY projects ?   Aaron J. Grier
• Embedded processors for DIY projects ?   Aaron J. Grier
• Embedded processors for DIY projects ?   Aaron J. Grier
• [motm] MOTM/MIDI Part #2   Aaron J. Grier
• Atmel and dreams!   Aaron J. Grier
• OTAs and Harry's flame bait BDDs   Aaron J. Grier
• PCB programs and etching companies?   Aaron J. Grier
• transistors (sorta unsynth related)   Andie Gudeye
• dreams   Andie Gudeye
• PAiA 4700 modular panel dimensions   Johan Gustavsson
• For all Yanks on the list.   Johan Gustavsson
• dreams   David Halliday
• Circuit simulation   David Halliday
• newbie, how to do etching, what kind of pen?   Hans-H.Klos
• resistors,Bc168 replacement   Hans-H.Klos
• Rack   Hans-H.Klos
• Fw: Roland Space Echo   Hans-H.Klos
• Fw: Pots?   Hans-H.Klos
• Pots?   Hans-H.Klos
• ASM-1 PCB availability?   Aaron Harding
• ASM-1 VCO testing   Aaron Harding
• ASM-1 VCO testing   Aaron Harding
• ASM-1 VCO testing   Aaron A Harding
• CV to Midi NOTE:   Hairy Harry
• Fw: dreams   Hairy Harry
• Allen Bradley   Hairy Harry
• WARNING! VIRUS!   Hairy Harry
• WARNING! LAWYERS! (was virus...)   Hairy Harry
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   Hairy Harry
• Some sequencer fustration and CD40xxB replacement question.   Hairy Harry
• capacitor voltage   Hairy Harry
• More about 3310 and envelopes   Hairy Harry
• Some sequencer fustration and CD40xxB replacement question.   Hairy Harry
• CEM3310s for sale   Hairy Harry
• Some sequencer fustration and CD40xxB replacement question.   Hairy Harry
• resistors,Bc168 replacement   Hairy Harry
• DIY PCB plated thru holes?   Hairy Harry
• tr606 leds   Hairy Harry
• power supply problem   Hairy Harry
• Thomas Henry Tunable Noise Source Question   Hairy Harry
• CoilRolling fun!   Hairy Harry
• stupid envelope follower idea   Hairy Harry
• For all Yanks on the list.   Hairy Harry
• Signal Presence Detectors?   Hairy Harry
• freq. mult.   Hairy Harry
• freq. mult.   Hairy Harry
• freq mult   Hairy Harry
• Modular Racks - good and bad   Hairy Harry
• Modular Racks - good and bad   Hairy Harry
• Modular Racks - good and bad   Hairy Harry
• faceplate white on black   J. Larry Hendry
• OTAs and Harry's flame bait BDDs   J. Larry Hendry
• For all Yanks on the list.   J. Larry Hendry
• BassStation Filter: What is it?   R.D. Hess
• I built a site for my vocoder project...   Christian Hofmann
• [-] More about 3310 and envelopes   Christian Hofmann
• 9720 VCO finished and a small problem   Mitchell Hudson
• CLS-222 on eBay   Thomas Hudson
• of topic: C programming style   Thomas Hudson
• Small Clone   Thomas Hudson
• Pattern Controlled Filter   Rob Hukin
• Prophet VS schematics   Rob Hukin
• Oberheim,Memory Moog and naked men in africa!   Rob Hukin
• Embedded processors for DIY projects ?   Antti Huovilainen
• Bode Barberpole Phaser   Mike I.
• Embedded processors for DIY projects ?   J.D.McEachin
• For all Yanks on the list.   J.D.McEachin
• Embedded processors for DIY projects ?   Byron G. Jacquot
• A Shot-in-the-Dark Question   Byron G. Jacquot
• SB joystickport for MIDI   Byron G. Jacquot
• Admin message: unsubscribed users   Rick Jansen
• ADMIN message   Rick Jansen
• SDS7   Isac Jensen
• CV to Midi NOTE:   Donald Johnson
• Bode Barber Pole Phaser   Donald Johnson
• Bode Barber Pole Phaser   Donald Johnson
• Pattern Controlled Filter   Jim Johnson
• [motm] MOTM/MIDI Part #2   Jim Johnson
• Cases   N.E. Johnson
• DIY PCB plated thru holes?   N.E. Johnson
• DX-7 Programmer   Haible Juergen
• [motm] MOTM/MIDI Part #2   Haible Juergen
• Moog Interview Online & Downloadable   Haible Juergen
• Vocoder design   Haible Juergen
• New JH CD "Dark November" available now   Haible Juergen
• more old inventions   Haible Juergen
• CEM3310s for sale   Haible Juergen
• More about 3310 and envelopes   Haible Juergen
• More about 3310 and envelopes   Haible Juergen
• OB-8 calibration error   Haible Juergen
• OB-8 calibration error   Haible Juergen
• Bode Barber Pole Phaser   Haible Juergen
• on topic   Haible Juergen
• Signal Presence Detectors?   Haible Juergen
• Signal Presence Detectors?   Haible Juergen
• revisiting that Bode Phaser   Haible Juergen
• RE(2): revisiting that Bode Phaser   Haible Juergen
• Speaking of Sine Shapers   Haible Juergen
• Speaking of Sine Shapers   Haible Juergen
• Pots?   Haible Juergen
• Speaking of Sine Shapers   Haible Juergen
• Of interest to scandinavians and Polands.   Bjorn Julin
• Embedded processors for DIY projects ?   Bjorn Julin
• Of interest to scandinavians and Polands.   Bjorn Julin
• [motm] MOTM/MIDI Part #2   Bjorn Julin
• Embedded processors for DIY projects ?   Bjorn Julin
• Embedded processors for DIY projects ? (Forth!)   Bjorn Julin
• OT Midi Forth music!   Bjorn Julin
• Atmel and dreams!   Bjorn Julin
• Embedded processors for DIY projects ?   Bjorn Julin
• new Formant book arrived   Bjorn Julin
• new Formant book arrived   Bjorn Julin
• dreams   Bjorn Julin
• new Formant book arrived   Bjorn Julin
• dreams   Bjorn Julin
• I built a site for my vocoder project...   Bjorn Julin
• Fw: dreams   Bjorn Julin
• OT: Endless patents!   Bjorn Julin
• OT: on the edge of eternal life or the gras is greener on the other side!   Bjorn Julin
• OT: on the edge of eternal life or the gras is greener on the other side!   Bjorn Julin
• SDS5   Bjorn Julin
• OT: on the edge of eternal life or the gras is greener on the other side!   Bjorn Julin
• FM!   Bjorn Julin
• TL071/TL081   Bjorn Julin
• What is important in a vocoder (Was Vocoder design)   Bjorn Julin
• TL071/TL081   Bjorn Julin
• Buffer less filter stages ,was stupid buffers, Oberheim Xpander.   Bjorn Julin
• OT: DIY emails from 2000 and forward! How do i do when i do?   Bjorn Julin
• WARNING! LAWYERS! (was virus...)   Bjorn Julin
• Some sequencer fustration and CD40xxB replacement question.   Bjorn Julin
• Oberheim,Memory Moog and naked men in africa!   Bjorn Julin
• Oberheim,Memory Moog and naked men in africa!   Bjorn Julin
• not quite off topic but, 8MHZ XTALS   Bjorn Julin
• BassStation Filter: What is it?   Bjorn Julin
• BassStation Filter: What is it?   Bjorn Julin
• BassStation Filter: What is it? Digital exponentiation!   Bjorn Julin
• XR2208 ,anyone having datapapers?   Bjorn Julin
• For all Yanks on the list.   Bjorn Julin
• Oberheim docs now in pdf   KA4HJH
• Turntable Modification   KA4HJH
• A Shot-in-the-Dark Question   KA4HJH
• TL071/TL081   KA4HJH
• Virus in which post?   KA4HJH
• Vocoder plug-in for REALbasic   KA4HJH
• One thing to be thankful for [OT]   KA4HJH
• OOPs   KA4HJH
• reverse engineering and help with a plug...   KA4HJH
• Intel N8097BH   Björn Karlsson
• Seeking DR envelope ideas   Kirk
• Seeking DR envelope ideas   Kirk
• OOPs   J. Landau
• sid chip 8580   Jaakko Lofstrom
• Synthacon weirdy filter   M.Ruberto
• mini mk2 osc board   Ken MacBeth
• test, please ignore   Ken MacBeth
• List not working ?   Ken MacBeth
• neon indicators   Ken MacBeth
• Apocalypse Now   Ken MacBeth
• Mini Modular   Chris MacDonald
• Frequency Shifters   Chris MacDonald
• Embedded processors for DIY projects ?   Paul Maddox
• [motm] MOTM/MIDI Part #2   Paul Maddox
• Embedded processors for DIY projects ?   Paul Maddox
• Fw: dreams   Paul Maddox
• [EFM] Re: midi drums/trigger   Paul Maddox
• SDS7   Paul Maddox
• Synch on the Digisound VCDO   Paul Maddox
• SDS5   Paul Maddox
• Problems with a user   Paul Maddox
• minimoog vco-boards   Paul Maddox
• CEM3310s for sale   Paul Maddox
• Oberheim,Memory Moog and naked men in africa!   Paul Maddox
• not quite off topic but, 8MHZ XTALS   Paul Maddox
• schematics for individual VCO, VCA, VCF, LFO etc.   Paul Maddox
• Uart problems   Paul Maddox
• DCO's , was Re: BassStation Filter: What is it?   Paul Maddox
• BassStation Filter: What is it?   Paul Maddox
• Bouncing mails   Paul Maddox
• PPG 2.3 boot failure   Paul Maddox
• Synth Module Board Pics   Paul Maddox
• more PPG 2.3 boot failure   Paul Maddox
• 'flash microchip' shortage...?   Paul Maddox
• MAT04 for ASM-1's   Mantid
• power supply problem   Kenneth Martinez
• power supply problem   Kenneth Martinez
• power supply problem   Kenneth Martinez
• Atmel and dreams!   Tom May
• neon indicators   Rory McDonald
• V/Oct scaling with 566 VCO   Malcolm B. McIntosh
• R.A. Moog schematics   Terry Michaels
• Allen Bradley   Terry Michaels
• triangle VCOs and Buchla designs   Terry Michaels
• R.A. Moog schematics - ALL!   Terry Michaels
• OT - Elka Rhapsody 490   Terry Michaels
• Moog modular cabinets   Terry Michaels
• MAT04 for ASM-1's   Terry Michaels
• not quite off topic but, 8MHZ XTALS   Terry Michaels
• DIY PCB plated thru holes?   Terry Michaels
• stupid envelope follower idea   Terry Michaels
• stupid envelope follower idea   Terry Michaels
• Speaking of Sine Shapers   Terry Michaels
• [Moog] Moog style pot knobs   Terry Michaels
• Speaking of Sine Shapers   Terry Michaels
• Speaking of Sine Shapers   Terry Michaels
• Polophony mag index   Microtonal
• Western Harmony   Microtonal
• Pattern Controlled Filter   The OMS
• Chaos LFO : who to manage 1/X ?   Toby Paddock
• Virus in which post?   Toby Paddock
• OT... But Who Else Can I Tell ?   Toby Paddock
• audio jack size between 1/8" and 1/4"?   Toby Paddock
• reverse engineering and help with a plug...   Toby Paddock
• Pattern Controlled Filter   Trevor Page
• pic16f84   Trevor Page
• old roland din connector   Trevor Page
• MC202 problem   Trevor Page
• The long lost 2SK 30(O)   Trevor Page
• The long lost 2SK 30(O)   Trevor Page
• OT... But Who Else Can I Tell ?   Trevor Page
• MIDI-Thru problem ?   Trevor Page
• PPG 2.3 boot failure   Trevor Page
• 'flash microchip' shortage...?   Trevor Page
• Who saw Bob?   Andrew Parker
• Embedded processors for DIY projects ?   Jim Patchell
• Embedded Processors-More thoughts   Jim Patchell
• Turntable Modification   Jim Patchell
• Turntable Modification   Jim Patchell
• Poly-800 Schematics?   Jim Patchell
• ASM-1 PCB availability?   Jim Patchell
• TL071/TL081   Jim Patchell
• Allen Bradley   Jim Patchell
• Synth DIY Web Sites Dilema   Jim Patchell
• DIY PCB plated thru holes?   Jim Patchell
• schematics for individual VCO, VCA, VCF, LFO etc.   Jim Patchell
• For all Yanks on the list.   Jim Patchell
• Speaking of Sine Shapers   Jim Patchell
• dreams   The Peasant
• schematic for a 24db or steeper Bandpass filter????   Kevin Peek
• I built a site for my vocoder project...   Kevin Peek
• Envelope follower for my vocoder...   Kevin Peek
• Embedded processors for DIY projects ?   Paul Perry
• Pattern Controlled Filter   Paul Perry
• Turntable Modification   Paul Perry
• TL071/TL081   Paul Perry
• Linear to Logarithmic Pot   Paul Perry
• Linear to Logarithmic Pot: applet   Paul Perry
• More about 3310 and envelopes   Paul Perry
• DIY PCB plated thru holes?   Paul Perry
• power supply problem   Paul Perry
• DIY PCB plated thru holes?   Paul Perry
• stupid envelope follower idea   Paul Perry
• stupid envelope follower idea   Paul Perry
• One thing to be thankful for [OT]   Paul Perry
• Polophony mag index   Paul Perry
• BOMARC schematic supplies   Paul Perry
• For all OT posters on the list.   Paul Perry
• revisiting that Bode Phaser   Paul Perry
• AW: Embedded processors for DIY projects ?   Ullrich Peter
• triangle VCOs and Buchla designs   Alan Podjursky
• One thing to be thankful for [OT]   Alan Podjursky
• For all Yanks on the list.   Alan Podjursky
• freq. mult.   Alan Podjursky
• old roland din connector   *Star Project
• SB joystickport for MIDI   *Star Project
• The long lost 2SK 30(O)   *Star Project
• The long lost 2SK 30(O)   *Star Project
• Vocoder design   Jeroen Proveniers
• Vocoder design   Jeroen Proveniers
• faceplate white on black   Jeroen Proveniers
• Midi the other way round...   Grant Richter
• California Chassis   Grant Richter
• California Chassis   Grant Richter
• Synch on the Digisound VCDO   Grant Richter
• TL071/TL081   Grant Richter
• Chaos LFO : who to manage 1/X ?   Grant Richter
• Frequency Shifters   Grant Richter
• triangle VCO help please   Grant Richter
• freq. mult.   Grant Richter
• please help. AD/AR envelope generator   Grant Richter
• Synch on the Digisound VCDO   Steve Ridley
• Some sequencer fustration and CD40xxB replacement question.   Steve Ridley
• DIY PCB plated thru holes?   Rob
• CoilRolling fun!   Rob
• One thing to be thankful for [OT]   Rob
• BassStation Filter: What is it?   Rob
• BassStation Filter: What is it?   Rob
• BassStation Filter: What is it?   Rob
• BassStation Filter: What is it?   Rob
• For all Yanks on the list.   Rob
• For all Yanks on the list.   Rob
• SDS5   John Rucker
• capacitor voltage   Jules Ryckebusch
• audio jack size between 1/8" and 1/4"?   Jules Ryckebusch
• BC172C   Niklas Rönnberg
• power supply question.   Eduardo Saponara
• ohm's law, and 555 question   Eduardo Saponara
• Some sequencer fustration and CD40xxB replacement question.   Eduardo Saponara
• reverse engineering and help with a plug...   Eduardo Saponara
• For all Yanks on the list.   Eduardo Saponara
• For all Yanks on the list.   Eduardo Saponara
• PCB programs and etching companies?   Eduardo Saponara
• PCB programs and etching companies?   Eduardo Saponara
• newbie, how to do etching, what kind of pen?   René Schmitz
• new Formant book arrived   René Schmitz
• dreams   René Schmitz
• dreams   René Schmitz
• new Formant book arrived   René Schmitz
• new Formant book arrived   René Schmitz
• V/Oct scaling with 566 VCO   René Schmitz
• Thomas Henry Tunable Noise Source Question   René Schmitz
• of topic: C programming style   René Schmitz
• Thomas Henry Tunable Noise Source Question   René Schmitz
• Thomas Henry Tunable Noise Source Question   René Schmitz
• Thomas Henry Tunable Noise Source Question   René Schmitz
• BBDs was:Re: BassStation Filter: What is it?   René Schmitz
• OTAs and Harry's flame bait BDDs   René Schmitz
• CEM3310s for sale   Paul Schreiber
• One thing to be thankful for [OT]   Paul Schreiber
• Free for shipping {ot}   Paul Schreiber
• Has anyone tried the PT2395 Echo IC?   David A. Schwan
• For all Yanks on the list.   Dana Scott
• For all Yanks on the list.   Dana Scott
• capacitor voltage   Troy Sheets
• Embedded processors for DIY projects ?   Kyn Si
• pic16f84   Kyn Si
• pic16f84   Kyn Si
• Other elektor stuff   Kyn Si
• minimoog vco-boards   Kyn Si
• oberheim obmx problem   Kyn Si
• capacitor voltage   Kyn Si
• Schematic/PCB-software for Linux   Kyn Si
• (no subject)   Peter Snow
• dreams   Peter Snow
• dreams   Peter Snow
• WARNING! VIRUS!   Peter Snow
• Oops! A Correction (Re: vocoders)   Kirke Sonnichsen
• Eclectic Question   Kirke Sonnichsen
• A Shot-in-the-Dark Question   Kirke Sonnichsen
• Moog Interview Online & Downloadable   Kirke Sonnichsen
• Moog Interview Online & Downloadable   Kirke Sonnichsen
• Z80 as embedded processor   Kasper Souren
• CEM3310s for sale   John Speth
• Other elektor stuff   Anders Sponton
• Audio Synthesis via Vacuum Tubes page update   Ken Stone
• Virus   Ken Stone
• The long lost 2SK 30(O)   Peter Tang
• Pattern Controlled Filter   Theo
• vocoders   Theo
• schematic for a 24db or steeper Bandpass filter????   Theo
• Embedded processors for DIY projects ?   Theo
• Midi the other way round...   Theo
• power supply question.   Theo
• Atmel and dreams!   Theo
• newbie, how to do etching, what kind of pen?   Theo
• Atmel and dreams!   Theo
• Atmel and dreams!   Theo
• WARNING! VIRUS!   Theo
• WARNING! VIRUS!   Theo
• AD relosution for Pitch CV.   Theo
• Some sequencer fustration and CD40xxB replacement question.   Theo
• More about 3310 and envelopes   Theo
• Some sequencer fustration and CD40xxB replacement question.   Theo
• More about 3310 and envelopes   Theo
• More about 3310 and envelopes #2   Theo
• For all Yanks on the list.   Nick Thompson
• OT: on the edge of eternal life or the gras is greener on the other side!   Don Tillman
• OT: on the edge of eternal life or the gras is greener on the other side!   Don Tillman
• Frequency Shifters   Don Tillman
• Allen Bradley   Don Tillman
• Frequency Shifters   Don Tillman
• Frequency Shifters   Don Tillman
• audio jack size between 1/8" and 1/4"?   Don Tillman
• neon indicators   Don Tillman
• stupid envelope follower idea   Don Tillman
• stupid envelope follower idea   Don Tillman
• stupid envelope follower idea   Don Tillman
• Bode Barber Pole Phaser   Don Tillman
• Signal Presence Detectors?   Don Tillman
• freq. mult.   Don Tillman
• Linear to Logarithmic Pot   Tom
• IBM EZCAD [aka Easytrax] PrintTo File   Tom
• Low(er) cost Vernier dials for EMS   Tony
• SV: Embedded processors for DIY projects ?   Karl Helmer Torvmark
• Roland Space Echo   Karl Helmer Torvmark
• SV: Roland Space Echo   Karl Helmer Torvmark
• PPG 2.3 boot failure   Sandro Traversi
• more PPG 2.3 boot failure   Sandro Traversi
• Synth Module Board Pics   Dave Trenkel
• Other elektor stuff   VINTVOLT
• Modular Racks - good and bad   Vic Vector
• Mini Modular   Vol
• Bode Barber Pole Phaser   Turner Wallace
• Bode Barber Pole Phaser   Turner Wallace
• For all Yanks on the list.   Dave Wilke
• Synch on the Digisound VCDO   Keith Winstanley
• Synch on the Digisound VCDO   Keith Winstanley
• Synch on the Digisound VCDO   Keith Winstanley
• Synch on the Digisound VCDO   Keith Winstanley
• HH Bass Machine Help   Keith Winstanley
• Bouncing mails   Keith Winstanley
• For all Yanks on the list.   Keith Winstanley
• FS: more stuff + cheaper stuff   andy
• audio jack size between 1/8" and 1/4"?   andy
• OT - Elka Rhapsody 490   BonoVox9 at aol.com
• MC202 problem (roland related)   BonoVox9 at aol.com
• MC202 problem (roland related)   BonoVox9 at aol.com
• DR-55 trig in mod   BonoVox9 at aol.com
• OT - Hammond Auto-Vari 64 (repair question)   BonoVox9 at aol.com
• OT - Hammond Auto-Vari 64 (repair question)   BonoVox9 at aol.com
• freq. mult.(crumar)   BonoVox9 at aol.com
• OOPs   CHoaglin at aol.com
• Turntable Modification   DCMagnuson at aol.com
• Small corroded terminals   DCMagnuson at aol.com
• V/Oct scaling with 566 VCO   DCMagnuson at aol.com
• Thomas Henry Tunable Noise Source Question   DCMagnuson at aol.com
• DIY PCB plated thru holes?   Hcabnivek at aol.com
• DIY PCB plated thru holes? Thanks for the advice!   Hcabnivek at aol.com
• OT - Elka Rhapsody 490   IXQY at aol.com
• Fwd: Feedback pot between input & output of circuit   Synthmanic at aol.com
• TL071/TL081   WeAreAs1 at aol.com
• More about 3310 and envelopes / Korg WaveDrum   WeAreAs1 at aol.com
• audio jack size between 1/8" and 1/4"?   WeAreAs1 at aol.com
• Bode Barber Pole Phaser   WeAreAs1 at aol.com
• reverse engineering and help with a plug...   WeAreAs1 at aol.com
• reverse engineering and help with a plug...   WeAreAs1 at aol.com
• freq. mult.   WeAreAs1 at aol.com
• Western Harmony   WeAreAs1 at aol.com
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   leaf at babble.vibrant.org
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   leaf at babble.vibrant.org
• Roland Space Echo   leaf at babble.vibrant.org
• PCB programs and etching companies?   leaf at babble.vibrant.org
• DIY webring.   sasami at blaze.net.au
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   sasami at blaze.net.au
• CEM3310s for sale   sasami at blaze.net.au
• neon indicators   sasami at blaze.net.au
• Midi the other way round...   dog boy
• modular analogue fx   booey chewy
• dreams   booey chewy
• otp Re: For all Yanks on the list.   booey chewy
• DIY PCB plated thru holes?   mbartkow at et.put.poznan.pl
• Using 4XXX family for new designs   synth at gjalass.com
• Chaos LFO : who to manage 1/X ?   modlar at gmx.net
• faceplate white on black   modlar at gmx.net
• soldering matched trannies   modlar at gmx.net
• Some sequencer fustration and CD40xxB replacement question.   djblue at graffiti.net
• weapons grade uranium...   djblue at graffiti.net
• reverse engineering and help with a plug...   djblue at graffiti.net
• Small Clone   p. hendricks
• Ringing oscilators/Re: More about 3310 and envelopes   nss at hevanet.com
• I built a site for my vocoder project...   jorgen.bergfors at idg.se
• Vocoder design   jorgen.bergfors at idg.se
• Vocoder design   jorgen.bergfors at idg.se
• Vocoder design   jorgen.bergfors at idg.se
• Vocoder design   jorgen.bergfors at idg.se
• DIY PCB plated thru holes?   jbv
• Test - please ignore   jbv
• Of interest to scandinavians and Polands.   jh.
• [motm] MOTM/MIDI Part #2   jh.
• [motm] MOTM/MIDI Part #2   jh.
• new Formant book arrived   jh.
• new Formant book arrived   jh.
• dreams   jh.
• new Formant book arrived   jh.
• new Formant book arrived   jh.
• CLS-222 on eBay   jh.
• new Formant book arrived   jh.
• CLS-222 on eBay   jh.
• new Formant book arrived   jh.
• Frequency Shifters   jh.
• Frequency Shifters   jh.
• Buffer less filter stages ,was stupid buffers, Oberheim Xpander.   jh.
• More about 3310 and envelopes   jh.
• More about 3310 and envelopes   jh.
• More about 3310 and envelopes   jh.
• OB-8 calibration error   jh.
• [AH] RE: OB-8 calibration error   jh.
• OB-8 Service Manual and ECOs   jh.
• OT: This mortal coil   jh.
• revisiting that Bode Phaser   jh.
• revisiting that Bode Phaser   jh.
• Speaking of Sine Shapers   jh.
• CV to Midi NOTE:   jupiterseries
• DR-55 trig in mod   jupiterseries
• This mortal coil   jupiterseries
• OOPs   jupiterseries
• tr606 leds   p h o n k
• tr606 leds   p h o n k
• tr606 leds   p h o n k
• No subject   steb -o- liscious
• ASM1-X, Mutron biphase clone, DCAM8x8...   m.bareille
• SH-101 LFO Ext Clock mod??   media at mail1.nai.net
• V/Oct scaling with 566 VCO   theinmans at mindspring.com
• V/Oct scaling with 566 VCO   theinmans at mindspring.com
• RS 20 sec recording module   theinmans at mindspring.com
• Embedded processors for DIY projects ?   mikko.a.helin at nokia.com
• Chromatic Keyboard   frank olivieri
• Atmel and dreams!   patchell
• Poly-800 Schematics?   patchell
• dreams   patchell
• Turntable Modification   patchell
• Korg Poly 800 Schematics   patchell
• No subject   patchell
• WARNING! VIRUS!   patchell
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   patchell
• Quad Opamps? (Was Re: ASM-1 PCB availability?)   patchell
• OT... But Who Else Can I Tell ?   patchell
• MAT04 for ASM-1's   patchell
• MAT04 for ASM-1's   patchell
• schematics for individual VCO, VCA, VCF, LFO etc.   patchell
• DIY PCB plated thru holes?   patchell
• Polophony mag index   patchell
• Synth Module Board Pics   patchell
• XR2208 ,anyone having datapapers?   patchell
• Synth Module Board Pics   patchell
• PCB programs and etching companies?   patchell
• Small Clone   peter_cornell
• no more Keyboard System?   riccardo
• newbie, how to do etching, what kind of pen?   rob
• MC202 problem   rob
• MC202 problem (roland related)   rob
• White multiwire (roland related)   rob
• The long lost 2SK 30(O)   rob
• Roland Space Echo   dave solursh
• I built a site for my vocoder project...   danial stocks
• Envelope follower for my vocoder...   danial stocks
• Chaos LFO : who to manage 1/X ?   danial stocks
• sid chip 8580   danial stocks
• TL071/TL081   danial stocks
• Some sequencer fustration and CD40xxB replacement question.   danial stocks
• Oberheim,Memory Moog and naked men in africa!   danial stocks
• No subject   danial stocks
• stupid envelope follower idea   danial stocks
• neon indicators   danial stocks
• stupid envelope follower idea   danial stocks
• faceplate white on black   danial stocks
• CoilRolling fun!   danial stocks
• One thing to be thankful for [OT]   danial stocks
• reverse engineering and help with a plug...   danial stocks
• For all Yanks on the list.   danial stocks
• Bode Barber Pole Phaser   danial stocks
• Bouncing mails   danial stocks
• For all Yanks on the list.   danial stocks
• on topic   danial stocks
• Signal Presence Detectors?   danial stocks
• freq. mult.   danial stocks
• freq. mult.   danial stocks
• Western Harmony   danial stocks
• Embedded processors for DIY projects ?   tomg
• midi drums/trigger   tomg
• midi drums/trigger   tomg
• midi drums/trigger   tomg
• [EFM] Re: midi drums/trigger   tomg
• new projects   tomg
• Vocoder design   tomg
• Vocoder design   tomg
• Vocoder design   tomg
• [EFM] Re: midi drums/trigger   tomg
• Panels   tomg
• CEM3310s for sale   tomg
• CEM3310s for sale   tomg
• neon indicators   tomg
• MIDI-Thru problem ?   tomg
• MIDI-Thru problem ?   tomg
• Who saw Bob?   tomg
• schematics for individual VCO, VCA, VCF, LFO etc.   peter at vanhamersveld.myweb.nl
• buchla timbre waveshaper   mark verbos
• Oops Buchla Timbre   mark verbos
• buchla timbre waveshaper   mark verbos
• descrete OTA in oscillators?   mark verbos
• CV to Midi NOTE:   mark verbos
• I built a site for my vocoder project...   mark verbos
• Vocoder design   mark verbos
• triangle oscillator cores and Buchla designs   mark verbos
• triangle VCOs and Buchla designs   mark verbos
• triangle VCOs and Buchla designs   mark verbos
• More about 3310 and envelopes   mark verbos
• neon indicators   mark verbos
• neon indicators   mark verbos
• 2N4248 transistor pinout?   mark verbos
• Triangle VCO help please   mark verbos
• triangle VCO help please   mark verbos
• BassStation Filter: What is it?   mark verbos
• Triangle VCO help please   mark verbos
• Buchla 258 adaptation functional was: triangle VCO help please   mark verbos
• Buchla 258 adaptation functional   mark verbos
• Synth Module Board Pics   mark verbos
• please help. AD/AR envelope generator   mark verbos
• vactrol filter success!! (Buchla 292 and 4-pole)   mark verbos
• V/Oct scaling with 566 VCO   metamatic at webtv.net
• BassStation Filter: What is it?   metamatic at webtv.net
• BassStation Filter: What is it?   metamatic at webtv.net
• Some sequencer fustration and CD40xxB replacement question.   tom wisdom

Last message date: Thu Nov 30 23:33:54 CET 2000
Archived on: Fri Apr 1 12:55:36 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...