faceplate white on black

[J. Larry Hendry]

I have done this with great success.  I can send you some photos of my
finished products if you like.  Your thoughts of using CorelDraw and a laser
printer works perfectly.  That is exactly the method I used.  The printing
was done on plain white paper.  The whole thing was covered with several
VERY light coats of urethane satin spray (almost splattered like).

I cannot take credit for this procedure.  That credit belongs to Ken Tkacs
who I met on the MOTM list.  He and I have both used this procedure to make
DIY modules and do some other kits conversions to match our MOTM panels
which are while screen on a black texture painted panel.

Ken has a detailed explanation of his panel making process at this website
at this link:

http://ourworld.compuserve.com/homepages/KenTkacs/mainProjectsConversions.ht
m

If you would like some photos e-mailed of my finished projects, I would be
happy to e-mail them privately.

Larry Hendry


----- Original Message -----
From: <modlar at gmx.net>
Has anyone experiences in producing faceplates
(without wasting too much money) with white
text on black background ?  I think, merely printing
a coreldraw design with a laser printer on an
adherent (white) plastic film would be enough, but :
does it look good ?