ASM-1 VCO testing (fwd)

[Tony Clark]

   I think this was supposed to go to the list...I've emailed him some 
suggestions already, but if you can help, please do so!

   Tony

-----------------------------------------------------------------------
  The E-Music DIY Archive - http://aupe.phys.andrews.edu/diy_archive
-----------------------------------------------------------------------

---------- Forwarded message ----------
Date: Tue, 21 Nov 2000 10:45:04 -0800 (PST)
From: m i n d s c a p e <iaramusic at yahoo.com>
To: Tony Clark <clark at andrews.edu>
Subject: Re: ASM-1 VCO testing


--- Tony Clark <clark at andrews.edu> wrote:
> > Would it be possible to hook up a
> > voltage source to one of the CV inputs and hook up a 1/4" jack to
> the saw
> > or pulse out and  use headphones to initially verify it is
> working? I have
> > a control pedal which out puts 0-5v I could easily hookup to a CV
> in.

Hi..
This is my first posting.
Nice to meet you everybody.
I have the same question.I recently built ASM-1.But it doesn't sound.
I tested before I setup whole.But I thought I don't need any cv input
source.Do I need any source to make any sound?
(I just connected wire from saw,square output to audio without any
cv)
And It sounded nothing.I thought I put something wrong.
Changsik


=====
Changsik Lee's  
m i n d s c a p e
http://www.mindscapemusic.com

__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/