old roland din connector

[*Star Project]

Hi!

In the old Roland TB-303 there is a kind of
special DIN socket. I functions as a switch
for the clock signal and puts the tb's clk
to gnd when a cable is connected. the same
goes for the run/stop signal aswell.
However coming acroos one of theese have proven
to be very difficult. I know there are sockets
that can do this but the problem is that they 
are mounted in another way. they have the switches
on the sides while the socket in the tb has them
behind the pin connectors.
If anyone have seen a socket like this please
tell me where. Modifying the pcb is not an option
since it simply cannot be done.

Thanx / Andreas H