New VCO,linearity!

[Augusto Pinoche]

Talking about VCO's, what is the highest linearity
percentage error one could accept over a 20Hz to 10KHz
range? Is 0,4% bad? Talking only about the VCO
not the expoconverter error introduced.

And how about the highest PPM Temp value for
the frequency of the VCO?


AP

>From: "Ian Fritz" <ijfritz at earthlink.net>

>The final result on tracking is an essentially perfect curve measured from 
> >100Hz to 20kHz. Per octave, the control voltage changes are all1.000 +/- 
>0.001V, or 0.1% tracking accuracy over the entire range.

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com