modular jack markers?

[Grant Richter]

You can take the rings and spraypaint them.
You need to mount them on scrap jacks to keep the paint off the threads
on the inside of the ring.

You can also paint them by hand with fingernail polish
(in many wonderful colors and can usually be stolen from
wife/girlfriend) keeping the paint off of the threads
also applies.

----------
>From: "J. Larry Hendry" <jlarryh at iquest.net>
>To: "synthDIY" <synth-diy at node12b53.a2000.nl>
>Subject: Re: modular jack markers?
>Date: Fri, May 19, 2000, 8:32 PM
>

> Dan, I never found any colored markers.  But, I did have some success
> getting the regular nylon "clear-like" washers and colored them with
> permanent markers like a marks-a-lot or a sharpie.  The color seems to be
> quite permanent.
>
> Larry Hendry
>
>
> ----------
>> From: Dan Gendreau <gendreau at rochester.rr.com>
>> To: synthDIY <synth-diy at node12b53.a2000.nl>
>> Subject: modular jack markers?
>> Date: Friday, May 19, 2000 4:05 PM
>>
>> I am putting together the minimodular and thought it would be nice to
> mark
>> the inputs/outputs with different colors.
>>
>> I seem to remember someone mentioning finding a source for colored
> plastic
>> washers to put on their jacks to serve this purpose. I am working with
> 1/8"
>> jacks. Any suggestions welcome.
>>
>> Thanks,
>> -Dan G.
>>
>