Mouintan Wiev Phase accumulator

[Tim Ressel]

I have the stuff I need (I hope) to start developing CPLDs like the XL9500.
Haven't tried it, though. There are some nifty (gulp) digital things to try.

--Timster

Tim Ressel--Compliance Engineer
Hewlett-Packard
Verifone Division
916-630-2541  
tim_r1 at verifone.com                     



-----Original Message-----
From: patchell [mailto:patchell at silcom.com]
Sent: Wednesday, May 17, 2000 7:57 PM
To: Augusto Pinoche
Cc: synth-diy at node12b53.a2000.nl
Subject: Re: Mouintan Wiev Phase accumulator




Augusto Pinoche wrote:

>
> That is what im doing! Being hard core and Inplementing
> the damned thing on a Gate array!
> Not just a single oscillator but an entire Synth! !
>
> Actually i dont think you need a Virtex
> some of the lesser gated devices vill do fine!
>

    But the virtex would be fun.  I was sort of thinking of using the 4010E or
the Spartan parts (XCS40).  With their dual port rams, it would be pretty easy
to implement the circuits that are in Hal Chamberlains book.  Putting a
parrallel multiplier into the chip really cramps it a bit, if you want to do
this.  I can't remember how much of the chip a 16x16 multiplier used.


-Jim
-----------------------------------------------------------------
Visit:http://www.silcom.com/~patchell/
-----------------------------------------------------------------