MIDI-THRU

[Niklas Rönnberg]

Niklas Rönnberg wrote:

> Which pin-number should go to the 220 ohm resistor (4 or 5)? Where can I
> find that pin, counted from which side?

That sounded strange... Once again:
Which pin-number on the midi-in jack should go to the 220 ohm resistor? And
where can I find that pin?
Both pin 4 and 5 should go to a 220 ohm resistor on the midi-thru jack...
/Niklas
___________________________________

Niklas Rönnberg, Lecturer (Media Technology)

Dept of Science and Technology (ITN)
Linköping University, Campus Norrköping

Phone: +46(0)11-363316 Fax:+46(0)11-363270
E-mail: nikro at itn.liu.se
Homepage: http://www.itn.liu.se/~nikro/

    "The semiotic $64,000 question:
  Why and how is who communicating what
     to whom and with what effect?"