MIDI-THRU

[Niklas Rönnberg]

Hello!
I build a midi-thru box this weekend. 1 midi-in to 8 midi-thru. I have
used this  Schematic (from Midwest Analog Products), at least some parts
of it.
http://mall.lakes.com/~map/graphics/advmd-s1.gif
But I am a bit confused, about the 5-pin DIN jacks. According to a
Swedish electronics supplier the pin number of the jack looks like this
(5'D'):
http://www.itn.liu.se/~nikro/synth/din.gif
The jack is numbered from the soldering side (the inside). Does the
schematic show the jack from the outside? Which pin-number should go to
the 220 ohm resistor (4 or 5)? Where can I find that pin, counted from
which side?
Please...
/Niklas
___________________________________

Niklas Rönnberg, Lecturer (Media Technology)

Dept of Science and Technology (ITN)
Linköping University, Campus Norrköping

Phone: +46(0)11-363316 Fax:+46(0)11-363270
E-mail: nikro at itn.liu.se
Homepage: http://www.itn.liu.se/~nikro/

    "The semiotic $64,000 question:
  Why and how is who communicating what
     to whom and with what effect?"