Fw: Power supply?

Theo t.hogers at home.nl
Fri Mar 31 20:22:41 CEST 2000


----- Original Message -----
From: Theo <t.hogers at home.nl>
To: <mitch at sirius.com>; [DIY] <synth-diy at mailhost.bpa.nl>; Synth Diy
<synth-diy at node12b53.a2000.nl>; [efm] <efm at xavax.com>
Sent: Friday, March 31, 2000 7:07 PM
Subject: Re: Power supply?


> Any number of modules is quit a lot.
> But a say 50W or 100W supply should not be a real problem.
> A "ring kern" transformer (sorry don't know how to call them in english)
> some short circuit protection,
> a net filter, a soft start (a power fet, optional) and a few stabelizers
> (LM317) must be enough to do the trick.
> You can use a poti's to change the voltage from the LM317s that way your
not
> limited to one output voltage.
>
> Hope this helps.
> Cheers Theo
>
>
> ----- Original Message -----
> From: mitchell <mitch at sirius.com>
> To: [DIY] <synth-diy at mailhost.bpa.nl>; Synth Diy
> <synth-diy at node12b53.a2000.nl>; [efm] <efm at xavax.com>
> Sent: Friday, March 31, 2000 11:34 PM
> Subject: Power supply?
>
>
> >     All of these wallwarts are driving me nuts is it posible to build a
> > power supply that could drive any number of modules? Say all of the
> > modules use +-15V.
> >
> > --M
> >
> >
>




More information about the Synth-diy mailing list