June 2000 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Jun 1 00:00:16 CEST 2000
Ending: Fri Jun 30 23:16:20 CEST 2000
Messages: 703

• Been quiet lately... too much DIY ?   Peter Snow
• testing   Geoff Waterston
• [EFM] Been quiet lately... too much DIY ?   Theo
• 3D Audio   Barry L Klein
• Been quiet lately... too much DIY ?   Hugo Haesaert
• Been quiet lately... too much DIY ?   Doug Tymofichuk
• synth diy page   Geoff Waterston
• [EFM] Been quiet lately... too much DIY ?   Paul Perry
• re.minimodular   patchell
• 3D Audio   Augusto Pinoche
• [EFM] Been quiet lately... too much DIY ?   Augusto Pinoche
• Panel speakers (was:Re: Been quiet lately... too much DIY ?)   IXQY at aol.com
• Solder suckin' fun (was Texas Instruments IC's)   KA4HJH
• re.minimodular   Tony Allgood
• [EFM] Been quiet lately... too much DIY ?   Anders Sponton
• PAIA Phantom Power Preamp   Doug Forbes
• minimodular   Dan Gendreau
• DIY Software   Tim Ressel
• Been quiet lately... too much DIY ?   Tim Ressel
• Been quiet lately... too much DIY ?   Doug Tymofichuk
• synth diy page url   Geoff Waterston
• minimodular   Dan Gendreau
• Polyfusion VCA building   Carlos Vila Deutschbein
• PAIA Phantom Power Preamp   Jules Ryckebusch
• Panel speakers (was:Re: Been quiet lately... too much DIY ?)   Peter Snow
• K-werk and expensive jingle for EXPO 2000   Bjorn Julin
• 3D Audio P51   Barry L Klein
• Kog Trident shemos   Augusto Pinoche
• K-werk and expensive jingle for EXPO 2000   Jukka Andersson
• 3D Audio   Florian Anwander
• OT: E-mail Change   Plinio Barraza
• vc-lfo4   tomg
• Electronics Parts Shops (NYC)   Christopher Bavitz
• Parametric equalizers (schematics)   Orlandi Marco
• MC1496 cheap at Electronic Goldmine   Paul Perry
• less hum: switching power supply?   chris
• less hum: switching power supply?   Jim Patchell
• less hum: switching power supply?   René Schmitz
• less hum: switching power supply?   Jay Martin
• Polyfusion VCA building   Tony Allgood
• Parametric equalizers (schematics)   Edu Silva
• Parametric equalizers (schematics)   Robert H. Rickner-III
• tr-606 mods   djtrev
• vc-lfo...4...er...6b   tomg
• tr-606 mods   Rob
• ASM-1 filter problems   Paul Wilkinson
• Parametric equalizers (schematics)   Stewart Pye
• Fw: TOM, a question re: more hybrid OTA filters   tomg
• FS: VCF-1 prototype   Tony Allgood
• White noise   Niklas Rönnberg
• What another one?   John E Blacet
• White noise   >>>marjan<<<
• What another one?   Tony Allgood
• What another one?   Augusto Pinoche
• White noise   Magnus Danielson
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Harry Bissell
• What another one?   J. Larry Hendry
• What another one?   Rob
• Ping: Gurus. MAT-04 EXPO for (2) VCO   tomg
• Ping: Gurus. MAT-04 EXPO for (2) VCO   jhaible
• Email Address Change   Scott Gravenhorst
• new old stuff   Anders Sponton
• Finished Polyfusion VCA!!   Carlos Vila Deutschbein
• White noise   Johan Gustavsson
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Tony Clark
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Tony Clark
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Jim Patchell
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Jim Patchell
• Hello   Paul Maddox
• less hum: switching power supply?   Roel Das
• OT HIFI amp mod   Roel Das
• HI! New on the list   Raoul Raffagli
• MAT-04 for expo & heater   Tim Ressel
• less hum: switching power supply?   Tim Ressel
• less hum: switching power supply?   Haible Juergen
• Ping: Gurus. MAT-04 EXPO for (2) VCO   Haible Juergen
• less hum: switching power supply?   Jay Martin
• less hum: switching power supply?   Jay Martin
• less hum: switching power supply?   Paul Perry
• less hum: switching power supply?   Heiko van der Linden
• HI! New on the list   Scott Gravenhorst
• OT HIFI amp mod   WeAreAs1 at aol.com
• less hum: switching power supply?   Jim Patchell
• Switching power supplies   Alex Stettler
• OT: General technical contracting   Buck Buchanan
• OT: General technical contracting info/advice   Buck Buchanan
• Moog Restoreing!!!   Gerry Dahl
• less hum: switching power supply?   Augusto Pinoche
• less hum: switching power supply?   Augusto Pinoche
• less hum: switching power supply?   jhaible
• less hum: switching power supply?   Jay Martin
• less hum: switching power supply?   Roel Das
• less hum: switching power supply?   Augusto Pinoche
• TR-505 => TR-808?   Drew Smith
• HI! New on the list   Byron G. Jacquot
• TR-505 => TR-808?   Byron G. Jacquot
• HI! New on the list   Troy Sheets
• less hum: switching power supply?   Harry Bissell
• less hum: switching power supply?   Harry Bissell
• TR-505 => TR-808?   Steve Richardson
• TR-505 => TR-808?   Rob
• mini-cams are in.   tomg
• Crumar Performer   BonoVox9 at aol.com
• HI! New on the list   WeAreAs1 at aol.com
• OT HIFI amp mod   Toby Paddock
• HI! New on the list   Byron G. Jacquot
• OT HIFI amp mod   Don Tillman
• HI! New on the list   Theo
• Switching power supplies   Paul Maddox
• TR-505 => TR-808?   Paul Maddox
• Exponential ADC   Paul Maddox
• TR-505 => TR-808?   paul
• TR-505 => TR-808   Tony Allgood
• TR-505 => TR-808?   Paul Maddox
• spare SSM2164?   John E Blacet
• TR-505 => TR-808?   paul
• Crumar Performer   Haible Juergen
• Exponential ADC   Tony Clark
• Exponential ADC   Dave Halliday
• Exponential ADC   Paul Maddox
• Power transistor identification Q   Hallgeir Helland
• OT HIFI amp mod   Edu Silva
• MAT-04 for expo & heater   Tim Ressel
• Power transistor identification Q   jhaible
• Exponential ADC   Magnus Danielson
• roland 180 keyboard   skinny bastard
• MAT-04/CA3046 Characterization   Tim Ressel
• roland 180 keyboard   Tim Ressel
• TR-505 => TR-808?   Rob
• roland 180 keyboard   Harry Bissell
• roland 180 keyboard   KA4HJH
• less hum: switching power supply?   Don Tillman
• Tech Tips (was) roland 180 keyboard OT   Harry Bissell
• OT: General technical contracting   Don Tillman
• MAT-04/CA3046 Characterization   patchell
• Tech Tips (was) roland 180 keyboard OT   KA4HJH
• OT: General technical contracting   David Halliday
• TR-505 => TR-808?   Ingo Debus
• less hum: switching power supply?   Ingo Debus
• Tech Tips (was) roland 180 keyboard OT   Ingo Debus
• less hum: switching power supply?   Heiko van der Linden
• Mod Wheel Modification   skinny bastard
• Mod Wheel Modification   >>>marjan<<<
• Need 2N4391 equivalent   Paul Wilkinson
• MAT-04/CA3046 Characterization   Tim Ressel
• Chroma PS Question   |||| Philip ||||
• Chroma PS Question   Dave Halliday
• Crumar Performer PLEASE HELP!   BonoVox9 at aol.com
• Chroma PS Question   Don Tillman
• Chroma PS Question   Blandon Ray
• Difference Between 4049 and 4069?   WeAreAs1 at aol.com
• Difference Between 4049 and 4069?   >>>marjan<<<
• MAT-04/CA3046 Characterization   Martin Czech
• MAT-04/CA3046 Characterization   Martin Czech
• The SuperLadder is dead, long live the SuperLadder2   Tony Allgood
• Crumar Performer PLEASE HELP!   jhaible
• Difference Between 4049 and 4069?   jhaible
• ASM-1 vco range   jimh54
• Thumping filter in a memorymoog   Gerry Dahl
• ASM-1 vco range   Tony Clark
• New VCO on web   Ian Fritz
• New parts source   epeasant at telusplanet.net
• HI! New on the list   meo
• Roland Space Echo   Nick Thompson
• Watkins Copycat schematics wanted   Keith Winstanley
• [Concertmate MG-1]   M.Ruberto
• New VCO on web   Bjorn Julin
• Thumping filter in a memorymoog   WeAreAs1 at aol.com
• New VCO on web   Jim Patchell
• HI! New on the list   Jim Patchell
• "The PIPE" - 10 notch Phaser   Mike I.
• Guitar as a controller   Raoul Raffagli
• Guitar as a controller   Troy Sheets
• Difference Between 4049 and 4069?   Magnus Danielson
• Guitar as a controller   Roel Das
• ASM-1 vco range   Magnus Danielson
• "The PIPE" - 10 notch Phaser   Mike I.
• XR2212 PLL   Augusto Pinoche
• Crumar Performer PLEASE HELP!   jhaible
• casio [shudder]   Jnco58607 at aol.com
• Roland Space Echo   Martin Czech
• Effects boards...was..Guitar as a controller   tomg
• mini-cam UD   tomg
• Effects boards...was..Guitar as a controller   >>>marjan<<<
• balanced help   Martin Czech
• [EFM] mini-cam UD   tomg
• Effects boards...was..Guitar as a controller   Roel Das
• Power transistor identification Q   Hallgeir Helland
• Roland Space Echo   Haible Juergen
• re casio fun   Sean-E
• balanced help   Martin Czech
• less hum: switching power supply?   Ingo Debus
• MAT-04/CA3046 Characterization   Tim Ressel
• less hum: switching power supply?   Tony Allgood
• balanced help   Magnus Danielson
• Scope Question   Romeo Fahl
• balanced help   Theo
• less hum: switching power supply?   John E Blacet
• 50kHz pitch shifter   Scott Gravenhorst
• Casio fun   Sean-E
• 50kHz pitch shifter   Scott Gravenhorst
• Blacet Research News   John E Blacet
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• 50kHz pitch shifter   Toby Paddock
• 50kHz pitch shifter   Harry Bissell
• Guitar as a controller   Harry Bissell
• ETI/Powertran/Elrad vocoder   Magnus Danielson
• 50kHz pitch shifter   Magnus Danielson
• Effects boards...was..Guitar as a controller   Don Tillman
• Batz!! your email adress!!   Bjorn Julin
• 50kHz pitch shifter   Harry Bissell
• 30mm 1meg audio sliders: WHERE?!?!   Rob
• [EFM] mini-cam UD   tomg
• new old stuff   Anders Sponton
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• Small PCB 1/4" jack source   Hallgeir Helland
• Small PCB 1/4" jack source   The Proteus
• 50kHz pitch shifter   Toby Paddock
• Moog Service Manuals   Martin Cox
• Opinions on the CA3080 ???   Harry Bissell
• Opinions on the CA3080 ???   KA4HJH
• LED's, opamps   matti at devo.com
• Pat's rant, Harry's rant, Don's rant.   Don Tillman
• Opinions on the CA3080 ???   Don Tillman
• equivalent ua726?   Ken MacBeth
• Pat's rant, Harry's rant, Don's rant.   KA4HJH
• Watkins Copycat schematics   Peter Blackett
• equivalent ua726?   Tom Verheyden
• CASIO HT3000   Raoul Raffagli
• ETI/Powertran/Elrad vocoder   Magnus Danielson
• Two switch per key keyboards   skinny bastard
• Moog Service Manuals   Augusto Pinoche
• harddisk storage   Augusto Pinoche
• Moog Service Manuals   Martin Cox
• Need Linear VCA for CV's   Paul Wilkinson
• harddisk storage   The Proteus
• Need Linear VCA for CV's   Tim Ressel
• Watkins Copycat schematics   Keith Winstanley
• harddisk storage   Bjorn Julin
• harddisk storage   Dave Halliday
• Two switch per key keyboards   Theo
• Capacitors   theoms at nettaxi.com
• Capacitors   Magnus Danielson
• Capacitors   Harry Bissell
• Two switch per key keyboards   Blandon Ray
• crap regulators?   Scott Gravenhorst
• balanced help   Martin Czech
• 50kHz pitch shifter   Martin Czech
• 50kHz pitch shifter   Scott Gravenhorst
• crap regulators?   John E Blacet
• less hum: switching power supply?   Haible Juergen
• mini-cam-pics   tomg
• OT   Anders Sponton
• 50kHz pitch shifter   Curtin, Steven D (Steven)
• 50kHz pitch shifter   Martin Czech
• 50kHz pitch shifter   Fraser, Colin J
• SQ-80 reading ESQ-1 cartridges ?   Haible Juergen
• harddisk storage   Paul Maddox
• [AH] SQ-80 reading ESQ-1 cartridges ?   Jim Johnson
• 50kHz pitch shifter   René Schmitz
• 50kHz pitch shifter   Grant Richter
• 50kHz pitch shifter   Barry L Klein
• crap regulators?   Carlos Vila Deutschbein
• Bat detector electronics, was Re: 50kHz pitch shifter   Donald Johnson
• 50kHz pitch shifter   WeAreAs1 at aol.com
• 50kHz pitch shifter   CHoaglin at aol.com
• Thanks: [AH] SQ-80 reading ESQ-1 cartridges ?   Haible Juergen
• New old stuff   Anders Sponton
• 50kHz pitch shifter   Magnus Danielson
• Used scopes pricelist?   Synthusiast
• Used scopes pricelist?   Blandon Ray
• 50kHz pitch shifter   Paul Perry
• Capacitors   theoms at nettaxi.com
• OT: Kunstkopf in German radio   Ingo Debus
• harddisk storage   Augusto Pinoche
• 50kHz pitch shifter   René Schmitz
• 50kHz pitch shifter   Benjamin Woenig
• supplement AW: less hum: switching power supply?   Haible Juergen
• SQ-80 reading ESQ-1 cartridges ?   Florian Anwander
• CROSSPOINT   Paul Maddox
• "The PIPE" - 10 notch Phaser   Haible Juergen
• pcb design package   Heiko van der Linden
• pcb design package   Fraser, Colin J
• binaural mp3 example   Barry L Klein
• ASM-1   jimh54
• pcb design package   Jim Patchell
• pcb design package   Tony Clark
• Possibly 1st ever poly?   Keith Winstanley
• 50kHz pitch shifter   Magnus Danielson
• CROSSPOINT   Magnus Danielson
• ASM-1   Magnus Danielson
• 50kHz pitch shifter   Martin Czech
• 50kHz pitch shifter   Martin Czech
• 50kHz pitch shifter   Martin Czech
• CROSSPOINT   >>>marjan<<<
• crap regulators?   Stewart Pye
• More on Crosspoints.   Paul Maddox
• More on Crosspoints.   Tony Clark
• bmp counter   Michael Schmid
• More on Crosspoints.   Curtin, Steven D (Steven)
• More on Crosspoints.   Paul Maddox
• More on Crosspoints.   Paul Maddox
• 50kHz pitch shifter   Dan Slater
• More on Crosspoints.   Tony Clark
• Needed: VCA/VCF IC for Juno 106   Jason Maston
• 50kHz pitch shifter   Magnus Danielson
• More on Crosspoints.   Roel Das
• More on Crosspoints.   Grant Richter
• Aries Modular Questions   Grant Richter
• 50kHz pitch shifter   Drew Smith
• More on Crosspoints.   Tony Clark
• Aries Modular Questions   Tony Clark
• More on Crosspoints.   René Schmitz
• Aries Modular Questions   patchell
• Has anyone seen this?   Byron G. Jacquot
• Needed: VCA/VCF IC for Juno 106   Florian Anwander
• More on Crosspoints.   Paul Maddox
• More on Crosspoints.   Paul Maddox
• More on Crosspoints.   René Schmitz
• Spring Line Hum   ______________
• Has anyone seen this?   Ian Fritz
• MAQ 16/3   jimh54
• mcam support files   tomg
• balanced tube VCA   Paul Perry
• Possibly 1st ever Poly   Keith Winstanley
• balanced tube VCA   Theo
• balanced tube VCA, forgot something.   Theo
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• Flux removal question   Blandon Ray
• balanced tube VCA   René Schmitz
• ETI/Powertran/Elrad vocoder   Magnus Danielson
• Flux removal question   Harry Bissell
• Flux removal question   Paul Wilkinson
• Flux removal question   Scott Gravenhorst
• Flux removal question   danial stocks
• Two Oakley filters   Tony Allgood
• Flux removal question   patchell
• Flux removal question   patchell
• Flux removal question   Rob
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• Flux removal question   Harry Bissell
• Flux removal question   Chris MacDonald
• Tom G's address   Hcabnivek at aol.com
• FS: toys & etc.   andy
• More FS...   andy
• ETI/Powertran/Elrad vocoder   Magnus Danielson
• Flux removal question   Rob
• toys & etc.   davealex
• Don's source follower   Don Tillman
• diy rules   RevTor at aol.com
• thinking of building DIY   Blair Cleveland
• keyboard/sequencer/thingie hybrid   skinny bastard
• Cutting circuit boards.   John E Blacet
• Cutting circuit boards.   John E Blacet
• Tom G's address   tomg
• toys & etc.   tomg
• Don's source follower   tomg
• slightly OT: FOXX pedals   Hallgeir Helland
• Possibly 1st ever Poly   Paul Maddox
• Cutting circuit boards.   J. Larry Hendry
• slightly OT: FOXX pedals   Edu Silva
• Tom G's address   tomg
• Cutting circuit boards.   Paul Maddox
• Don's source follower   Michael Lloyd
• Cutting circuit boards.   Chris MacDonald
• Cutting to the prize   J. Larry Hendry
• Cutting circuit boards.   Tony Clark
• keyboard/sequencer/thingie hybrid   skinny bastard
• Cutting to the prize   Jay Martin
• Possibly 1st ever Poly   Keith Winstanley
• Cutting circuit boards.   Jim Patchell
• Cutting circuit boards.   danial stocks
• Test: (sorry do not read...)   Hairy Harry
• sync24 specifications   Trevor Page
• Cutting circuit boards.   Rob
• Cutting to the prize   Rob
• keyboard/sequencer/thingie hybrid   Byron G. Jacquot
• Nord Micro Modular   jeff grube
• keyboard/sequencer/thingie hybrid   skinny bastard
• Cutting circuit boards.   J. Larry Hendry
• Nord Micro Modular   matti at devo.com
• Don's source follower   Don Tillman
• balanced / banana was Re: balanced help   Martin Czech
• Nord Micro Modular + Patchable modular idea.   Paul Maddox
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• simple LFO question   Kiira Triea
• garage clearance   Greg Montalbano
• PCB outsourcing?   Jon Darby
• Nord Micro Modular + Patchable modular idea.   Cameron Zwarich
• keyboard/sequencer/thingie hybrid   Grant Richter
• synths etc., no diy   Jukka Andersson
• keyboard/sequencer/thingie hybrid   Haible Juergen
• garage clearance   Greg Montalbano
• sync24 specifications   danial stocks
• sync24 specifications   Dan Gendreau
• Jupiter-8 part needed   DrTempus
• simple LFO question   Greg Montalbano
• simple LFO question   J. Larry Hendry
• ETI/Powertran/Elrad vocoder   Magnus Danielson
• PCB outsourcing?   Blair Cleveland
• Jupiter-8 part needed   Tony Allgood
• sync24 specifications   Bojan Burkeljc
• sync24 specifications   Byron G. Jacquot
• simple LFO question   Kiira Triea
• OT: Roland system 100 sequencer   skinny bastard
• synths etc., no diy   theoms at nettaxi.com
• simple LFO question   WeAreAs1 at aol.com
• synths etc., no diy   Rob
• simple LFO question   Byron G. Jacquot
• sync24 specifications   theoms at nettaxi.com
• simple LFO question   Jim Johnson
• Insects   Volition
• freq counter?   mark scetta
• OT: Roland system 100 sequencer   Anders Sponton
• A more complex MIDI-DIN Sync convertor?   Simon
• freq counter?   John E Blacet
• Insects   danial stocks
• simple LFO question   Paul Perry
• sync24 specifications   Fraser, Colin J
• Insects   Volition
• simple LFO question   KA4HJH
• Insects   matti at devo.com
• simple LFO question   WeAreAs1 at aol.com
• Insects   theoms at nettaxi.com
• A more complex MIDI-DIN Sync convertor?   Dan Gendreau
• simple LFO question   Mike I.
• CEM3328 VCFs?   DCMagnuson at aol.com
• simple LFO question   danial stocks
• simple LFO question   Magnus Danielson
• freq counter?   Magnus Danielson
• freq counter?   Chris MacDonald
• Jupiter-8 part needed   Trevor Page
• freq counter?   jdec at mindspring.com
• simple LFO question   Paul R. Higgins
• A more complex MIDI-DIN Sync convertor?   Trevor Page
• freq counter?   Dave Halliday
• freq counter?   Robert Donker
• simple LFO question   Jules Ryckebusch
• simple LFO question   KA4HJH
• freq counter?   KA4HJH
• CADtools for Illustrator! Mac & PC!   KA4HJH
• freq counter?   Magnus Danielson
• freq counter?   Magnus Danielson
• [Fwd: RE: freq counter?]   Peter Blackett
• Jupiter-8 part needed FIXED!   DrTempus
• freq counter?   Bojan Burkeljc
• A word of warning!   Keith Winstanley
• Yamaha CS-05   Jon Parker
• Update On Yamaha CS-05   Jon Parker
• Yamaha CS-05   J. Larry Hendry
• 3D Experiments   Tim Ressel
• ETI/Powertran/Elrad vocoder   Hallvard Tangeraas
• A word of warning!   Volition
• harddisk storage   Augusto Pinoche
• pcb design package   Augusto Pinoche
• Insects   Harry Bissell
• Insects   KA4HJH
• Insects   patchell
• CEM3328 VCFs?   danial stocks
• Insects   Volition
• [sdiy] Elastomeric Connectors - Replacement For Bread Boards?   Toby Paddock
• A word of warning!   danial stocks
• Yamaha CS-05   Jon Parker
• CEM3328 VCFs?   Paul Maddox
• A word of warning!   Paul Maddox
• A more complex MIDI-DIN Sync convertor?   Stewart Pye
• A word of warning!   Volition
• CEM3328 VCFs?   Paul Schreiber
• obmx/cem 5508   Kyn Si
• CEM3328 VCFs?   Paul Maddox
• very OT?   Anders Sponton
• CEM3328 VCFs?   CCartCat at aol.com
• Uninformed Pawn Shop owners (was: A word of warning!)   jason
• simple LFO question   Greg Montalbano
• A more complex MIDI-DIN Sync convertor?   Dan Gendreau
• Yamaha CS-05   matt wilson
• Project Scans   Greg Montalbano
• Uninformed Pawn Shop owners (was: A word of warning!)   Doug Forbes
• VCF 6   Richard Rowley
• Updates to musicsynthesizer.com   Grant Richter
• Jupiter-8 part needed FIXED!   Tony Allgood
• A word of warning!   The Peasant
• Blatant Advertising - live show in Vancouver 06/23/00   Drew Smith
• [AH] Blatant Advertising - live show in Vancouver 06/23/00   Robert Donker
• [AH] Blatant Advertising - live show in Vancouver 06/23/00   Drew Smith
• Linear VCF   Tony Allgood
• Uninformed Pawn Shop owners (was: A word of warning!)   Kiira Triea
• VCF 6   tomg
• Linear VCF   Tim Ressel
• PIC programmer   tomg
• Linear VCF   René Schmitz
• PIC programmer   rob
• Linear VCF   Romeo Fahl
• Uninformed Pawn Shop owners (was: A word of warning!)   jason
• Totally OT: Yokels Run Amok on Local Highway   KA4HJH
• tube synth kit almost ready   eric
• Totally OT: Yokels Run Amok on Local Highway   eric
• 2300's arent all 2300's   Paul Perry
• freq counter?   Martin Czech
• Uninformed Pawn Shop owners (was: A word of warning!)   Benjamin Woenig
• [Fwd: RE: freq counter?]   Martin Czech
• A more complex MIDI-DIN Sync convertor?   Paul Maddox
• Totally OT: Yokels Run Amok on Local Highway   Paul Maddox
• Totally OT: Yokels Run Amok on Local Highway   Emmanuel AMADIO
• elv not in english   Martin Czech
• Uninformed Pawn Shop owners (was: A word of warning!)   danial stocks
• Totally OT: Yokels Run Amok on Local Highway   danial stocks
• Totally OT: Yokels Run Amok on Local Highway   Tony Clark
• Totally OT: Yokels Run Amok on Local Highway   epeasant at telusplanet.net
• Totally OT: Yokels Run Amok on Local Highway   Tony Allgood
• Linear VCF   jhaible
• Totally OT: Yokels Run Amok on Local Highway   Paul Maddox
• VCF 6   Rob Rickner
• 2300's arent all 2300's   mbartkow at et.put.poznan.pl
• 2300's arent all 2300's   Paul Perry
• Totally OT: Yokels Run Amok on Local Highway   Synthusiast
• A more complex MIDI-DIN Sync convertor?   Dan Gendreau
• pawn shops   Dan Gendreau
• A more complex MIDI-DIN Sync convertor?   Jim Patchell
• poly61   paul van bavel
• Totally OT: Yokels Run Amok on Local Highway   jbv
• Totally OT: Yokels Run Amok on Local Highway   KA4HJH
• A more complex MIDI-DIN Sync convertor?   Steve Richardson
• A more complex MIDI-DIN Sync convertor?   Tim Ressel
• A more complex MIDI-DIN Sync convertor?   Tim Ressel
• Totally OT: Yokels Run Amok on Local Highway   Peter Snow
• A more complex MIDI-DIN Sync convertor?   Steve Richardson
• Service Manual for Moog Satellite   Grant Richter
• A more complex MIDI-DIN Sync convertor, Mac uC compiler?   Paul R. Higgins
• Totally OT: Yokels Run Amok on Local Highway   Rob
• Pawn shops (sad truth)   Harry Bissell
• Linear VCF   Magnus Danielson
• Service Manual for Moog Satellite   Byron G. Jacquot
• I'm in the home streatch   patchell
• Linear VCF   The Peasant
• A word of warning!   Keith Winstanley
• Touch switch again   Ingo Debus
• JH Wasp Clone   Keith Winstanley
• Yamaha YM3812 (OPL2)   DCMagnuson at aol.com
• Yamaha YM3812 (OPL2)   Paul Perry
• JH Wasp Clone   Keith Winstanley
• Pawn shops (sad truth)   Rob
• JH Wasp Clone   Keith Winstanley
• Pawn shops (sad truth)   CasioRZ1 at aol.com
• TOM DRUM MACHINE POWER SUPPLY   djtrev
• Casio VL-Tone   Trevor Page
• Pawn shops (sad truth)   Rob
• Pawn shops (sad truth)   Harry Bissell
• A more complex MIDI-DIN Sync convertor?   Theo
• A more complex MIDI-DIN Sync convertor?   Byron G. Jacquot
• Oscillations   farky
• guitar synth   farky
• Yamaha YM3812 (OPL2)   danial stocks
• Pawn shops (sad truth)   danial stocks
• Casio VL-Tone   Tom May
• Pawn shops (sad truth)   Benjamin Woenig
• Am I coming through?   Magnus Jonsson
• TB3030   Tony Allgood
• AD7945   Tony Allgood
• guitar synth   Harry Bissell
• Pawn shops (sad truth)   Peter Snow
• guitar synth   Rob
• guitar synth   Theo
• guitar synth   Jon Parker
• Casio VL-Tone   tomg
• I'm coming through!   Magnus Jonsson
• Casio VL-Tone   tomg
• Don's source follower   Michael Lloyd
• Behringer Composer MDX 2100 schemos/help needed!   Daniel Araya
• BassAce Manual   tomg
• stable expo gen for vco?   Scott Gravenhorst
• TOM DRUM MACHINE POWER SUPPLY   Jim Johnson
• I'm coming through!   Scott Gravenhorst
• A more complex MIDI-DIN Sync convertor?   Paul Maddox
• Linear VCF   John E Blacet
• A more complex MIDI-DIN Sync convertor, Mac uC compiler?   Paul Maddox
• MIDI to Sync24 Converter - and other pic goodies!   tomg
• A more complex MIDI-DIN Sync convertor?   Paul Maddox
• Oscilloscope!   Scott Gravenhorst
• stable expo gen for vco?   Ken MacBeth
• I'm coming through!   Hallvard Tangeraas
• MIDI to Sync24 Converter - and other pic goodies!   Hallvard Tangeraas
• I'm coming through!   Fraser, Colin J
• PICs and midi timing   CasioRZ1 at aol.com
• Saga of the uP developer   Tim Ressel
• Don's source follower   Don Tillman
• PICs and midi timing   Dan Gendreau
• PICs and midi timing   Dan Gendreau
• FW: PICs and midi timing   Dan Gendreau
• PICs and midi timing   John Speth
• I'm coming through!   Don Tillman
• I'm coming through!   Hallvard Tangeraas
• Three is better than two...   Tony Allgood
• Don's source follower   Hairy Harry
• Power Connector   patchell
• I'm coming through!   Tony Allgood
• A word of warning!   Keith Winstanley
• Three is better than two...   Hairy Harry
• I'm coming through!   Edu Silva
• Three is better than two...   Tim Ressel
• kr-55   paul van bavel
• I'm coming through!   Hallvard Tangeraas
• Totally OT: Yokels Run Amok on Local Highway   Augusto Pinoche
• Totally OT: Yokels Run Amok on Local Highway   Augusto Pinoche
• Saga of the uP developer   patchell
• Oscilloscope!   patchell
• Saga of the uP developer   Tim Ressel
• I'm coming through!   Synthusiast
• Power Connector   Byron G. Jacquot
• A more complex MIDI-DIN Sync convertor?   Byron G. Jacquot
• kr-55   Romeo Fahl
• I'm coming through!   jhaible
• Saga of the uP developer   Fraser, Colin J
• kraftwerk sound (klang)   Kyn Si
• Atari 2600 sound chip   Trevor Page
• MIDI to Sync24 Converter - and other pic goodies!   Paul Maddox
• Three is better than two...   Paul Maddox
• A more complex MIDI-DIN Sync convertor?   Paul Maddox
• Saga of the uP developer   Paul Maddox
• I'm coming through!   Magnus Jonsson
• Saga of the uP developer   Fraser, Colin J
• AVR mailing list   Paul Maddox
• Don's source follower   Edu Silva
• Rabbit!!   Augusto Pinoche
• Saga of the uP developer   Jim Patchell
• Saga of the uP developer   The Old Crow
• Saga of the uP developer   Curtin, Steven D (Steven)
• SV: A more complex MIDI-DIN Sync convertor?   Karl Helmer Torvmark
• A more complex MIDI-DIN Sync convertor?   Paul Maddox
• Saga of the uP developer   Paul Maddox
• Anderton MIF   Greg Montalbano
• Synth Module Board   Jim Patchell
• kraftwerk sound (klang)   Martin Czech
• I'm coming through!   René Schmitz
• Atari 2600 sound chip   Simon
• test   Haible Juergen
• obx-a help needed please   Rick Scott
• Oddy VCO IC   Tony Allgood
• Anderton MIF   KA4HJH
• Three is better than two...   Tony Allgood
• Scenix uControllers   Paul Wilkinson
• Atari 2600 sound chip   Jim Patchell
• Three is better than two...   WeAreAs1 at aol.com
• Anderton MIF   KA4HJH
• Anderton MIF   Paul Perry
• Scenix uControllers   patchell
• Scenix uControllers   CasioRZ1 at aol.com
• Scenix uControllers   Rob
• old sound chips   danial stocks
• Don's source follower   Don Tillman
• Anderton MIF   John E Blacet
• Scenix uControllers   Paul Maddox
• Scenix uControllers   Paul Maddox
• Oddy VCO IC   Joachim Verghese
• Atari 2600 sound chip   David Anderson
• old sound chips   David Anderson
• old sound chips   Jim Patchell
• Scenix uControllers   Rob
• Don's source follower   Haible Juergen
• Scenix uControllers   Tony Clark
• Don's source follower   Don Tillman
• Datasheets wanted...   Tony Clark
• Digisound 80-22 patcher: any experiences?   ak
• 3D Experiments   Tom Verheyden
• I'm coming through!   Ingo Debus
• old sound chips   Peter Snow
• Anderton MIF   Grant Richter
• freq counter?   Augusto Pinoche
• All in one Scope,DVM and F counters for your DIY!   Augusto Pinoche
• Scenix uControllers   Byron G. Jacquot
• Scenix uControllers   Paul Maddox
• freq counter?   Martin Czech
• 2SK170 and 2SJ74 data sheets ? (was: RE: Don's source follower)   Haible Juergen
• all tranny vca+   tomg
• Thanks !: 2SK170 and 2SJ74   Haible Juergen
• No subject   Plinio Barraza
• Wanted MAD1108 LM1036   Keith Winstanley
• Everybody needs a pack rat for a freind   Jim Patchell
• matching transistors   Bipin E Butala
• matching transistors   Jay Martin
• TOM DRUM MACHINE Interesting Problem   djtrev
• all tranny vca+   tomg
• [EFM] Re: all tranny vca+   tomg
• TOM DRUM MACHINE Interesting Problem   WeAreAs1 at aol.com
• New VCO   tomg
• Everybody needs a pack rat for a freind   IXQY at aol.com
• matching transistors   Edu Silva
• matching transistors   Harry Bissell
• [EFM] Wanted MAD1108 LM1036   Keith Winstanley
• Compensating multi-stage feedback (was: RE: all tranny vca+ )   Haible Juergen
• [EFM] Wanted MAD1108 LM1036   tomg
• New Midi products   tomg
• [EFM] New Midi products   tomg
• [EFM] Wanted MAD1108 LM1036   The Old Crow
• Compensating multi-stage feedback (was: RE: all tranny vca+ )   Paul Perry
• New Midi products   Jim Patchell
• Compensating multi-stage feedback (was: RE: all tranny vca+ )   René Schmitz
• OT?: ID3v2 (?) encoding synchronized control parameters in MP3 files   Barry L Klein
• matching transistors   Edu Silva
• design philosophy was: (Compensating multi-stage feedback)   René Schmitz
• Moog Satellite   Grant Richter
• design philosophy was: (Compensating multi-stage feedback)   tomg
• AVR's at Digikey!!!   Jim Patchell

Last message date: Fri Jun 30 23:16:20 CEST 2000
Archived on: Fri Apr 1 12:54:53 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...