Cutting circuit boards.

[Rob]

FWIW this is prlly the best way unless you have access to a shear.. Scoring
the pcb then breaking it works but isnt all that accurate.

I have been meaning to small shear/dremel press for years..

Rob

----- Original Message -----
From: John E Blacet <blacet at metro.net>
To: J. Larry Hendry <jlarryh at iquest.net>
Cc: Synth DIY <synth-diy at node12b53.a2000.nl>
Sent: Monday, June 19, 2000 2:28 AM
Subject: Re: Cutting circuit boards.


> PS: We have a hand tool in the shop that is a "nibbler". It takes a
> little square bite out of metal or fiberglass and you just chomp away
> until the job is done. It's really a little punch press.
> --
>
> Regards.
> -------------------------
> John Blacet
> Blacet Research Music Electronics
> http://www.blacet.com
> -------------------------
> blacet at metro.net
> -------------------------
> Are you on our mailing list?
> http://www.blacet.com/mailform2.html
>